Improved oil recovery by 3D hydrogel composite reinforced with natural bentonite nanoparticles

Farzin Saghandali,Mahsa Baghban Salehi,Vahid Taghikhani,Taghikhani, Vahid

DOI: https://doi.org/10.1007/s13726-023-01212-6

2023-08-09

Iranian Polymer Journal (English Edition)

Abstract:Over the past years, oil and gas research works have been concentrated in the enhanced oil recovery methods through injection of chemical materials. In this work, Co[AM-AMPS-MA]/PEI-MBA(Ben) nanocomposite hydrogel was designed and synthesized. To characterize the synthesized nanocomposite hydrogel, TGA, DTG, XRD, FTIR, SEM, and ESEM techniques, and equilibrium swelling, frequency and temperature sweep, and micromodel tests were applied. Based on TGA and DTG data, thermal stability of the sample was confirmed at the reservoir temperature. The XRD analysis confirmed the amorphous structure of the nanocomposite hydrogel and the homogeneous distribution of the nanoparticles in its structure. SEM and ESEM micrographs proved homogeneous and porous structure of the nanocomposite and its hydrogel, respectively. Based on the frequency and temperature sweep test, the linear viscoelastic behavior of the nanocomposite was determined in the frequency range of 0.1–10 Hz and under the range from ambient temperatures up to 140 oC. The shape recovery property was confirmed by the loop test. The equilibrium swelling test indicated an increase in swelling with increasing temperature and a decrease with increasing salinity. The sensitivity factors to salinity at 25 °C and 90 °C were observed as 0.62 and 0.86, respectively. Finally, the nanocomposite hydrogel flooding test results in the micromodel confirmed the synthesized nanocomposite's ability to increase oil recovery by 57%. Note that based on the results of this test, the oil recovery factor by injecting distilled water was calculated to be 36%. According to the obtained results, the synthesized nanocomposite has the potential to be used as an injectable chemical to increase oil recovery.