Abstract:The fractured granite reservoir is well developed in Yongle block, which leads to severe drilling fluid loss-circulation. To solve the technical problem of both plugging and reservoir protection, on the basis of comprehensive literature research and laboratory tests at home and abroad, a polymer with an appropriate molecular weight, an organic crosslinking agent and other auxiliary materials were screened. In addition, a kind of high-temperature resistant loss-circulation plugging gel, which could be formed by timing and self-degradation, was developed. The high-strength gel loss-circulation system can be established by the development of a dynamic covalent borate ester bond crosslinking agent, which can crosslink with polyvinyl alcohol and xanthan gum. This system is of formidable strength and can be used for loss-circulation control in a fractured formation. The dynamic covalent borate ester bond tends to break due to the peroxide glue breaker under low pH levels, which can accelerate the degradation of the plugging gel into small molecules. The degradable temporary plugging material can ensure high-performance sealing and self-degradation capabilities of the fractured granite reservoir. The laboratory results showed that the high-performance degradable gel system was of adjustable gelling time, high gelling strength and high sealing capability. Its pressure-bearing could reach 5.8 MPa under 110 °C with 3.5 mm width of fractured granite core. Before crosslinking, the system also boasted promising thixotropy and rheology. The gel breaking time of the system was short, which could be completely broken with 6.1 h in 6% peroxide solution with pH of 4. The gelation time was related to the type of crosslinking agent, the amount of crosslinking agent and temperature. With the increase of temperature, the gelation time of gel system decreased. With the increase of the amount of the agent, the gelation time of gel system decreased. The gelation time was 105 min when using a 1% dynamic covalent borate ester bond crosslinking agent at 80 °C; the gelation time was 72 min when using a 1% dynamic covalent borate ester bond crosslinking agent at 110 °C; the gelation time was 71 min when using a 2% dynamic covalent borate ester bond crosslinking agent at 80 °C; the gelation time was 65 min when using a 2% dynamic covalent borate ester bond crosslinking agent at 110 °C; the gelation time was 72 min when using a 1% chromium crosslinking agent at 80 °C; the gelation time was 63 min when using a 2% chromium crosslinking agent at 80 °C; and the gel system had good reservoir protection performance. The permeability recovery rate was introduced to evaluate reservoir protection performance. The permeability recovery rate of using the dynamic covalent borate ester bond crosslinking agent was superior to that of using the chromium crosslinking agent. Using the dynamic covalent borate ester bond crosslinking agent, when the fracture width was 1.6 mm, the temperature was 80 °C and the soaking time was 8 h, the permeability recovery rate was 90.32%; when the fracture width was 0.75 mm, the temperature was 80 °C and the soaking time was 8 h, the permeability recovery rate was 84.53%. Using the chromium crosslinking agent, when the fracture width was 1.6 mm, the temperature was 80 °C and the soaking time was 12 h, the permeability recovery rate was 59.58%; when the fracture width was 0.75 mm, the temperature was 80 °C and the soaking time was 12 h, the permeability recovery rate was 45.65%. The viscosity of the residual solution was low and was helpful for reservoir protection during loss-circulation control under the fractured granite reservoir condition. The novel degradable temporary plugging material can solve the loss-circulation problem of the ultra-deepwater fractured granite reservoir. In addition, the material can pave the way for the exploration and development of a vast amount of hydrocarbon resources in the South China Sea.

Synthesis and Evaluation of Plugging Gel Resistant to 140 °C for Lost Circulation Control: Effective Reduction in Leakage Rate in Drilling Process

Synthesis and evaluation of delayed anti-high temperature gel plugging agent

Preparation, Evaluation and Field Application of Thermally Induced Crosslinked Polymer Gel Leakage Plugging Agent

Development and Application of the Anti-High-Temperature Delayed Crosslinking Polymer as a Gel Plugging Additive for Drilling Fluid

Lignin-based Plugging Hydrogel with High-Temperature Resistance and Adjustable Gelation

An Innovative High-Strength Double-Network Hydrogel for Use as a Drilling Fluid Plugging Agent

Preparation and Performance Evaluation of Temperature-Resistant and Salt-Resistant Gels

Preparation of Low-Molecular-Weight Polyacrylamide as the Delayed Crosslinking Plugging Agent for Drilling Fluid

Research Progress of High-Temperature Resistant Functional Gel Materials and Their Application in Oil and Gas Drilling

Preparation and Performance Evaluation of a Supramolecular Polymer Gel-Based Temporary Plugging Agent for Heavy Oil Reservoir

Plugging Mechanisms Of Polymer Gel Used For Hydraulic Fracture Water Shutoff

Synthesis and Performance Evaluation of a Novel Heat and Salt-Resistant Gel Plugging Agent

Evaluation of Supramolecular Gel Properties and Its Application in Drilling Fluid Plugging

Developments of polymer gel plug for temporary blocking in SAGD wells

Preparation and performance evaluation of intelligent plugging agent for thermo‐sensitive water‐based drilling fluid

Study on self‐healing gel plugging agent based on non‐covalent bonding interaction for drilling fluid

Preparation and Evaluation of Composite Hydrogel for Reducing the Leakage Rate of Lost Circulation

A novel polymer gel with high-temperature and high-salinity resistance for conformance control in carbonate reservoirs

The Development and Deployment of Degradable Temporary Plugging Material for Ultra-Deepwater Wells

Preparation and Characterization of Temperature-Sensitive Gel Plugging Agent

Degradable Gel for Temporary Plugging in High Temperature Reservoir and Its Properties