Abstract:In previous work we reported on the simulation of mixing behavior of a slowly rotating drum for solid-state fermentation (SSF) using a discrete particle model. In this investigation the discrete particle model is extended with heat and moisture transfer. Heat transfer is implemented in the model via interparticle contacts and the interparticle heat transfer coefficient is determined experimentally. The model is shown to accurately predict heat transfer and resulting temperature gradients in a mixed wheat grain bed. In addition to heat transfer, the addition and subsequent distribution of water in the substrate bed is also studied. The water is added to the bed via spray nozzles to overcome desiccation of the bed during evaporative cooling. The development of moisture profiles in the bed during spraying and mixing are studied experimentally with a water-soluble fluorescent tracer. Two processes that affect the water distribution are considered in the model: the intraparticle absorption process, and the interparticle transfer of free water. It is found that optimum distribution can be achieved when the free water present at the surface of the grains is quickly distributed in the bed, for example, by fast mixing. Alternatively, a short spraying period, followed by a period of mixing without water addition, can be applied. The discrete particle model developed is used successfully to examine the influence of process operation on the moisture distribution (e.g., fill level and rotation rate). It is concluded that the extended discrete particle model can be used as a powerful predictive tool to derive operating strategies and criteria for design and scale-up for mixed SSF and other processes with granular media.

Heat Transfer Model in a Rotary Drum During the Fermentation Process

THE MATHEMATICAL SIMULATION OF AN ETHOXYLATION TUBULAR REACTOR

Simulation of Biomass Pyrolysis in a Rotary Drum by Coupling CFD-DEM with a One-Dimensional Thermally Thick Model

Mathematical Model for Mass and Heat Transfer in Multilevel Reactor for Pyrolysis of Used Tyres

Investigation of heat transfer in partially filled horizontal drums

Progress of Studied on Lactic Acid Fermentation Mathematical Models

Numerical Simulation of Transient Radial Temperature Distribution in Rotating Drum Bioreactor for Solid State Fermentation

Heat and water transfer in a rotating drum containing solid substrate particles

An Investigation of Heat Transfer of Flexible Fibers in a Rotating Drum Dryer Using the Discrete Element Method

A Mathematical Model of Heat Transfer in a Rotary Kiln Thermo‐Reactor

Modeling of rotating drum bioreactor for anaerobic solid-state fermentation

Some aspects of heat transfer in rolling mode rotating drums operated at low to medium temperatures

Heat and Mass Transfer in Agitated, Co-, or Countercurrent Conductive–Convective Heated Drum Dryer

Heat transfer of cohesive particles in a rotary drum: Effect of material properties and processing conditions

Combined discrete particle and continuum model predicting solid-state fermentation in a drum fermentor

DEM simulation and analysis of particle mixing and heat conduction in a rotating drum

Experimental investigation of conduction heat transfer in a rotary drum using infrared thermography

3D modelling of coupled mass and heat transfer of a convection-oven roasting process

MOVEMENT AND HEAT TRANSFER MODELING OF TIRE PYROLYSIS IN A ROTARY KILN

Heat transfer studies in a rotating drum containing non-spherical particles