Abstract:As surface wear is one of the major failure mechanisms in many applications that include polymer gears, lifetime prediction of polymer gears often requires time-consuming and expensive experimental testing. This study introduces a contact mechanics model for the surface wear prediction of polymer gears. The developed model, which is based on an iterative numerical procedure, employs a boundary element method (BEM) in conjunction with Archard's wear equation to predict wear depth on contacting tooth surfaces. The wear coefficients, necessary for the model development, have been determined experimentally for Polyoxymethylene (POM) and Polyvinylidene fluoride (PVDF) polymer gear samples by employing an abrasive wear model by the VDI 2736 guidelines for polymer gear design. To fully describe the complex changes in contact topography as the gears wear, the prediction model employs Winkler's surface formulation used for the computation of the contact pressure distribution and Weber's model for the computation of wear-induced changes in stiffness components as well as the alterations in the load-sharing factors with corresponding effects on the normal load distribution. The developed contact mechanics model has been validated through experimental testing of steel/polymer engagements after an arbitrary number of load cycles. Based on the comparison of the simulated and experimental results, it can be concluded that the developed model can be used to predict the surface wear of polymer gears, therefore reducing the need to perform experimental testing. One of the major benefits of the developed model is the possibility of assessing and visualizing the numerous contact parameters that simultaneously affect the wear behavior, which can be used to determine the wear patterns of contacting tooth surfaces after a certain number of load cycles, i.e., different lifetime stages of polymer gears.

Computer Simulation/Prediction of Wear in Mechanical Components

Modeling and simulation of wear for alignment mechanism of large aircraft component

Research on Wear Prediction of Piston/cylinder Pair in Axial Piston Pumps

Wear prediction for metals

Modeling and simulation for wear prediction in planar mechanical systems with multiple clearance joints

Numerical Prediction of Wear in SAG Mills Based on DEM Simulations

Research on dynamic and wear prediction models of compound planetary transmission systems

A computationally efficient method for the prediction of fretting wear in practical engineering applications

A computational model of wear evolution for shot peened surfaces of gear steel

An engineering approach for the prediction of wear in mixed lubricated contacts

Sediment-wear morphology prediction method of hydraulic machine based on differential-quadrature method

Predictive Modeling of Surface Wear in Mechanical Contacts under Lubricated and Non-Lubricated Conditions

A Contact Mechanics Model for Surface Wear Prediction of Parallel-Axis Polymer Gears

A Comprehensive Method for Joint Wear Prediction in Planar Mechanical Systems with Clearances Considering Complex Contact Conditions

A machine learning approach to predict the wear behaviour of steels

Modelling and fatigue reliability investigation on wear prediction of piston/cylinder pair based on friction fatigue mechanism

Research Status of Wear Prediction of Spherical Friction Pair

Frictional Study on 30CrNi2MoVA Steel Based on Experiments and Finite Element Simulation: Wear Prediction

Analysis of the Wear Mechanism of High-Speed Transmission and the Prediction Model.

A life-cycle dynamic wear degradation model of planetary gear systems

Efficient Wear Simulation Methodology for Predicting Nonlinear Wear Behavior of Tools in Sheet Metal Forming