Frictional Study on 30CrNi2MoVA Steel Based on Experiments and Finite Element Simulation: Wear Prediction

Ao Wei,Yiyi Li,Lianghai Feng,Yongjun Feng,Zhiwen Xie

DOI: https://doi.org/10.3390/coatings14030265

IF: 3.236

2024-02-23

Coatings

Abstract:30CrNi2MoVA steel demonstrates excellent performance, meeting the requirements of a crucial material for high-load structural parts. However, after experiencing high loads and thermal cycling, the material undergoes wear on its contact surfaces, resulting in a certain wear depth that determines its service life. Therefore, accurately predicting and evaluating the wear performance and wear depth of this material is of paramount importance. This study employs a combined approach of experimental and simulation methods. Initially, friction and wear tests were conducted to investigate the wear behavior of the 30CrNi2MoVA steel. The experimental results reveal a significant influence of thermal cycling temperature on the material's wear resistance, with wear mechanisms primarily attributed to adhesive wear and abrasive wear. Subsequently, a ball-on-disc wear model was established. Based on experimental data, the modified Archard model was implemented as a user subroutine in finite element software (ABAQUS version 2020) to assess the material's wear volume. The simulation results demonstrate a close agreement with the experimental wear depths. Furthermore, a fitting formula was developed to correlate the wear depth of the material with the number of wear cycles, enabling accurate wear depth prediction. This study provides theoretical support for enhancing the performance and extending the service life of 30CrNi2MoVA steel.

materials science, multidisciplinary,physics, applied, coatings & films

What problem does this paper attempt to address?

The main problem that this paper attempts to solve is the wear behavior of the contact surface of 30CrNi2MoVA steel after experiencing high loads and thermal cycles and its impact on the service life of the material. Specifically, the research objectives include:

1. **Experimental research**: Through friction and wear tests, study the wear behavior of 30CrNi2MoVA steel at different thermal cycle temperatures. The experimental results reveal the important influence of thermal cycle temperature on the wear resistance of the material, and the main wear mechanisms are adhesive wear and abrasive wear.

2. **Finite - element simulation**: Based on the experimental data, establish a ball - disk wear model and implement the modified Archard model in the finite - element software (ABAQUS 2020 version) to evaluate the wear volume of the material. The simulation results show a high degree of consistency with the experimental wear depth.

3. **Wear depth prediction**: Develop a fitting formula to correlate the wear depth of the material with the number of wear cycles, thereby achieving accurate prediction of the wear depth.

Through these methods, the research aims to provide theoretical support for improving the performance of 30CrNi2MoVA steel and prolonging its service life. This research is of great significance for optimizing component design and manufacturing and for performance improvement under special conditions.