Abstract:Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, Ahead of Print. Under high speeds and heavy loads, gear tooth surfaces will be worn, which will lead to accidents. The current wear prediction model is not comprehensive, but the wear prediction model that considers the temperature field and dynamic response can provide more accurate gear wear fault early warning than previous methods. Therefore, according to the Archard model, the discrete wear prediction model of the tooth surface is deduced in this paper, and the wear evolution trend of the tooth surface is predicted and analyzed in each operation stage. The tooth surface temperature field was simulated by the finite-element method, and the tooth surface wear prediction model was improved considering its influence on materials. In addition, the dynamic model of the compound planetary transmission system was established, and the wear prediction model was improved again by using its nonlinear meshing force. Finally, the tooth wear prediction model under the interaction of the dynamic response and temperature field was obtained. A wear measurement method based on duplicate adhesive film was proposed. The wear evolution trend along the tooth length direction and the tooth width direction were measured, and the accuracy of the wear prediction model was verified. The results show that the wear depth along the tooth width direction is larger in the middle part and smaller on both sides under the influence of temperature. After the interference of the dynamic response, the wear depth along the tooth rectangle fluctuates, which is very similar to the results of the theoretical prediction model. It provides a theoretical basis for the early warning of gear health status in practical engineering.

Research on Sliding Wear Behavior of Co-based Alloy and Its Simulation Prediction

Research on Sliding Wear Behavior of Co-based Alloy Based on Experiments with Material of Pin and Disc Exchanged

Modeling and simulation of wear for alignment mechanism of large aircraft component

Experimental Analysis and Wear Prediction Model Based on Friction Heat for Dry Sliding Contact

Dry sliding wear behavior of additively manufactured CoCrWNixAly alloys

Study on Simulation of Coupled Heat Transfer, Stress and Wear Behavior in Pin-on-disc Experiments

Numerical simulation on high-speed and heavy-load wear behavior of CoCrNi and CoCrFeMnNi alloys

Frictional Study on 30CrNi2MoVA Steel Based on Experiments and Finite Element Simulation: Wear Prediction

Simulation of Sliding Wear in Mixed Lubrication

Grey Modeling of Non-equidistant Data Sequent for Forcasting Wearing Behaviors of Co-based Alloys

A Simulation Method of Thermo-Mechanical and Tribological Coupled Analysis in Dry Sliding Systems

Analysis of Stellite Alloys Wearing Prediction Based on Radial Basis Function Neural Network

Correlating numerical modelling with experimental studies to quantify the wear resistance of high-carbon chromium bearing steel in mixed lubrication

Molecular Dynamics Study on Nano-Friction and Wear Mechanism of Nickel-Based Polycrystalline Superalloy Coating

Calculation and Analytical Prediction of Coating Wear during Tribological Tests Based on Models of Contact Fatigue Failure

Atomistic insights into friction and wear characteristics of M50 bearing steel: a molecular dynamics simulation study

Prediction of tribological performance of AA8011/wt.%ZrO2 based composites fabricated by stir casting route

Tribological performance prediction of WS 2 coating under different conditions by machine learning

Finite element analysis of sliding wear on the borided AISI 316L stainless steel

Overview of Friction and Wear Performance of Sliding Bearings

Research on dynamic and wear prediction models of compound planetary transmission systems