Abstract:During tribological loading of metallic alloys at elevated temperatures, the thermo-mechanical coupling effect can lead to the development of a distinct tribolayer, profoundly influencing their tribological behavior. This study reports on the compositional lamination in the tribolayer during dry sliding wear of a VCoNi multiprincipal element alloy at elevated temperatures. As the temperature increases from 25 degrees C to 600 degrees C, the alloy exhibits a remarkable 40% reduction in the coefficient of friction and a notable two-order-of-magnitude decrease in wear rate. The compositional lamination at 600 degrees C reveals a distinct tribolayer comprising a nanocrystalline-amorphous oxide glaze layer, a Ni-rich dealloyed layer, and a plastic deformation layer. Within the oxide glaze layer, three sublayers are identified, each featuring a nanocrystalline-amorphous nanocomposite structure with unique equiaxed nanograins. Specifically, the outermost sublayer comprises Co3O4, the intermediate sublayer contains a mixture of Co3O4 and Ni2V2O7, and the inner sublayer consists of V2O5. This multilayered structure is attributed to significant differences in the chemical affinity for oxygen among the constituent elements and their respective diffusion rates in the oxide scale. Significantly, the tribolayer formed at 600 degrees C exhibits a remarkable 70% increase in yield strength compared to its formation at 25 degrees C, correlating with a substantial reduction in wear. These findings present a novel avenue for designing self-adaptive, high-temperature wear-resistant alloys through the in-situ formation of a protective compositionally-laminated tribolayer.

Research on Sliding Wear Behavior of Co-based Alloy Based on Experiments with Material of Pin and Disc Exchanged

Research on Sliding Wear Behavior of Co-based Alloy and Its Simulation Prediction

Study of Dry Sliding Wear Characteristics of Stellite 6B Versus AISI M2 Steel at Various Sliding Velocities

Dry sliding wear behavior of additively manufactured CoCrWNixAly alloys

Dry Friction Characteristics of Ti-6Al-4V Alloy under High Sliding Velocity

Effect of Rotational Sliding Velocity on Micro Tribological Behaviors of Cu50Zr50Amorphous Alloy Foils

Influences of counterparts on the high-temperature tribological properties and glaze layer formation of pre-oxidized cobalt-based alloys

The Relationships Between Tribological Behaviour and Heat-Transfer Capability of Ti6Al4V Alloys

Sliding Behaviour of Friction Material Against Cermet Coatings: Pin-on-Disc Study of the Running-in Stage

Sliding Wear-Induced Compositional Lamination in a VCoNi Alloy at Elevated Temperatures, and Its Implications for Reduced Friction and Wear

Effects of Tribo-Film on Wear Resistance of Additive Manufactured Cobalt-Based Alloys During the Sliding Process

Friction and Wear Performances of Materials for Wind Turbine Sliding Bearing Bushes

Dry sliding wear of Cu–15Ni–8Sn alloy

Molecular Dynamics Study on Nano-Friction and Wear Mechanism of Nickel-Based Polycrystalline Superalloy Coating

Numerical study of sliding wear caused by a loaded pin on a rotating disc

Study on Simulation of Coupled Heat Transfer, Stress and Wear Behavior in Pin-on-disc Experiments

Dry Sliding Behavior and Particulate Emissions of a SiC-graphite Composite Friction Material Paired with HVOF-Coated Counterface

Sliding wear behavior of Cr–Mo–Cu alloy cast irons with and without nano-additives

Dry Sliding Wear Behavior of Ti-6Al-4V Alloy in Air

Friction and wear characteristics of plasma-sprayed WC coatings in dliding against GCr15 steel

Dry sliding wear behavior of Fe3Al alloys prepared by mechanical alloying and plasma activated sintering