Abstract:Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, Ahead of Print. This study investigates the wear behavior of temporary implant such as plates and screws made by Mg–2Zn–1Mn alloy reinforced with β-tricalcium phosphate (β-TCP) under both dry and wet sliding conditions. Grey relational analysis (GRA) and an artificial neural network (ANN) model were utilized to predict wear and optimize performance, considering process parameters such as β-TCP content (0%, 2.5%, 5%), load (20, 40, 60 N), sliding speeds (2, 4, 6 m/s), and sliding distances (800, 1600, 2400 m). The wear rate (Ws) and coefficient of friction (COF) were evaluated using an orthogonal array L27 to optimize both dry and wet conditions. The optimal process parameters obtained through GRA for dry conditions are 5% β-TCP, 20 N, 4 m/s, and 1600 m, while for wet conditions, they are 0% β-TCP, 20 N, 2 m/s, and 2400 m. The experiment was conducted to calculate Ws and COF using the above process parameters. The values of Ws and COF are 0.010149 mm3/m and 0.109 for dry conditions, and 0.001143 mm3/m and 0.128 for wet conditions. The ANN predicted values for dry conditions are 0.010471 mm3/m for Ws and 0.11045 for COF, with error percentages of 3.17% and 1.33%, respectively. Similarly, for wet conditions, the predicted values are 0.001107 mm3/m for Ws and 0.125 for COF, with error percentages of 3.13% and 2.77%. The ANOVA results for the Grey relational grade (GRG) show that load was the most significant factor influencing wear performance, contributing 51.91% in dry conditions and 34.69% in wet conditions. The close alignment of predictions from both models, with overall error percentages below 3.17%, demonstrates their reliability and effectiveness. Field emission scanning electron microscope (FESEM) analysis of worn surfaces under optimal conditions provided insights into the wear mechanisms. This study confirms that GRA and ANN models are highly effective for predicting and optimize the wear behavior.

Predicting Wear Resistance of High-Carbon Cr-V Alloy Steel based on Machine Learning

Wear Resistance Prediction of AlCoCrFeNi-X (Ti, Cu) High-Entropy Alloy Coatings Based on Machine Learning

Property Prediction for High-Chromium High-Vanadium Steel Based on Transfer Component Analysis with Few-Shot Guided

Prediction of Tribological Performance of Ti-3Al-2.5 V-xWC Composite using Machine Learning Models

Design of chromium-vanadium steel based on design loop combining property-oriented design criteria and machine learning prediction model

Rolling wear model of high-vanadium high-speed steel based on multiple regression analysis

A Zero-Shot Learning for Property Prediction of Wear-Resistant Steel Based on Multiple-source

Frictional Study on 30CrNi2MoVA Steel Based on Experiments and Finite Element Simulation: Wear Prediction

An intelligent prediction model of the tool wear based on machine learning in turning high strength steel

Prediction of wear loss quantities of ferro-alloy coating using different machine learning algorithms

Optimisation of chemical composition of high speed steel with high vanadium content for abrasive wear using an artificial neural network

Correlating numerical modelling with experimental studies to quantify the wear resistance of high-carbon chromium bearing steel in mixed lubrication

Predictive Analytics of Wear Performance in High Entropy Alloy Coatings through Machine Learning

Tool Wear Prediction Model Based on Wear Influence Factor

A machine learning approach to predict the wear behaviour of steels

Very high‐cycle fatigue life prediction of high‐strength steel based on machine learning

Hardness Prediction of WC-Co Cemented Carbide Based on Machine Learning Model

Machine Learning-Based Framework for Predicting Creep Rupture Life of Modified 9Cr-1Mo Steel

Predicting and optimizing the wear behavior of centrifugal cast β-TCP/ Mg–2Zn–1Mn alloys: A hybrid artificial neural network—Grey relational analysis approach

Triboinformatics Approach for Prediction of High-Stress Abrasive Wear and Coefficient of Friction in Al/TiC Nanocomposites Using Machine Learning Techniques

Machine Learning Algorithms to Predict Wear Behavior of Modified ZA-27 Alloy Under Varying Operating Parameters