Abstract:Magnesium, valued for its lightweight, recyclability, and biocompatibility, faces challenges like its poor wear behavior and mechanical properties that limit its adaptation for a multitude of applications. In this study, various statistical analyses, and machine learning (ML) techniques were employed to optimize equal channel angular pressing (ECAP) process parameters for improving the wear behavior of Mg-3wt.% Zn-0.7 wt% Ca alloy. ECAP was conducted up to four passes via route Bc at 250 °C. Wear testing of both as-annealed (AA) and ECAP-processed alloys was performed using the dry ball-on-flat wear method under varying loads, speeds, and time. One pass (1P) and 4Bc-ECAP resulted in a notable uniform grain refinement of 86 % and 91 %, respectively, compared to the AA. X-ray diffraction (XRD) analysis confirmed a refined structure attributed to extensive dynamic recrystallization. Mechanical wear testing revealed a significant reduction in volume loss (VL), up to 56 % and 28.5 % after 1P and 4Bc samples, respectively, compared to the AA sample, supported by the observed texture intensity. The coefficient of friction (COF) stabilizes at 0.30-0.45, indicating low friction characteristics. Next, by adjusting wear load and speed through design of experiments (DOE), the wear output responses, VL and COF, were experimentally investigated. The output responses were predicted in the second step using ML, 3D response surface plots, and statistical analysis of variance (ANOVA). According to the regression model, the minimal VL was attained at a 5 N applied load. Also, the wear speed and VL at different passes are inversely proportional. On the other hand, the optimal COF was obtained at applied load about 2-3 N and 250 mm/s at different passes. The wear process variables were then optimized using different optimization techniques namely, genetic algorithm (GA), hybrid DOE-GA, and multi-objective genetic algorithm (MOGA) approaches.

Machine Learning Algorithms to Predict Wear Behavior of Modified ZA-27 Alloy Under Varying Operating Parameters

Interpretable ensemble machine learning framework to predict wear rate of modified ZA-27 alloy

Investigation of the Wear Behavior of AA6063/Zirconium Oxide Nanocomposites Using Hybrid Machine Learning Algorithms

Estimation of wear performance of AZ91 alloy under dry sliding conditions using machine learning methods

Triboinformatic modeling of dry friction and wear of aluminum base alloys using machine learning algorithms

Machine Learning Algorithms for Predicting Wear Rates on the Basis of Friction Noise

Prediction of wear loss quantities of ferro-alloy coating using different machine learning algorithms

The Prediction of Wear Depth Based on Machine Learning Algorithms

Experimental Investigation of the Influence of Various Wear Parameters on the Tribological Characteristics of AZ91 Hybrid Composites and Their Machine Learning Modeling

A machine learning approach to predict the wear behaviour of steels

Influence of Al2O3 Nanoparticles Addition in ZA-27 Alloy-Based Nanocomposites and Soft Computing Prediction

Predictive Analytics of Wear Performance in High Entropy Alloy Coatings through Machine Learning

Short-Term Cross-Sectional Time-Series Wear Prediction by Deep Learning Approaches

Predicting Wear Resistance of High-Carbon Cr-V Alloy Steel based on Machine Learning

Experimental investigations with machine learning techniques for understanding of erosion wear in advanced aluminum nanocomposites

Optimization of wear parameters for ECAP-processed ZK30 alloy using response surface and machine learning approaches: a comparative study

A comparative study of machine learning and response surface methodologies for optimizing wear parameters of ECAP-processed ZX30 alloy

Triboinformatics Approach for Friction and Wear Prediction of Al-Graphite Composites Using Machine Learning Methods

Prediction of Wear Rate of Glass-Filled PTFE Composites Based on Machine Learning Approaches

Surface Wear Rate Prediction in Reinforced AA2618 MMC by Employing Soft Computing Techniques