Abstract:There are many sand-laden waters in China, and the wear of hydraulic structures caused by sand-laden water diversion has been paid more and more attention. Taking the spillway of a reservoir as the research object, the numerical model of erosion wear caused by sediment-laden particle flows on the spillway was established by using the computational fluid dynamics (CFD) method, VOF (Volume of Fluid) multiphase flow model and DPM (Discrete Phase Model). Through the simulation analysis of the spillway’s overall erosion, the distribution of the spillway erosion wear was obtained. Then, according to the main wear parts, the single variable, such as sediment diameter, sediment concentration, flow velocity and gate opening degree, was changed to study the erosion amount of the spillway and the distribution law of the spillway erosion parts. The results show that the main erosion sites of the spillway are at the bottom of the gate chamber and the middle section of the spillway. The maximum erosion increases linearly with the increase in sediment concentration. With the increase in sediment concentration, the sediment concentration changed from 1 kg/m3 to 6 kg/m3, and the maximum erosion of the spillway increased from 2.58 × 10−7 kg/m2 to 1.53 × 10−6 kg/m2. The erosion at the bottom of the spillway and gate leaf increases first and then decreases with the increase in sediment diameter and reaches the maximum value when the particle size is 0.002 mm. The erosion at the bottom of the spillway and the gate leaf increases with different growth trends as the flow velocity increases, when the flow velocity increases from 2 m/s to 9 m/s and the maximum erosion amount at the bottom of the spillway increases from 3.66 × 10−7 kg/m2 to 1.14 × 10−6 kg/m2, and the maximum erosion of the gate leaf increased from 1.66 × 10−8 kg/m2 to 8.98 × 10−6 kg/m2. The erosion amount at the bottom of the spillway increases with the increase in the gate opening between 0 and 3 m and tends to be stable when the gate opening is greater than 3 m. The maximum erosion position moves to the rear part of the spillway with the change in the gate opening. The change in the gate opening has no obvious effect on the erosion amount of the gate leaf but only changes the area of the gate erosion part. Thus, the erosion wear distribution of spillway under different work conditions is summarized, and the qualitative study between the erosion wear and the distribution of sediment diameter, sediment concentration, flow velocity and gate opening degree is made.

Sediment-wear morphology prediction method of hydraulic machine based on differential-quadrature method

Numerical Research on Kerf Characteristics of Abrasive Waterjet Machining Based on the SPH-DEM-FEM Approach

Numerical Simulation of Solid-Liquid Two-Phase Flow and Wear Prediction of a Hydraulic Turbine High Sediment Content

Numerical Prediction of Wear in SAG Mills Based on DEM Simulations

Numerical Simulation and Experimental Study on Sediment Wear of Fixed Guide Vanes of Hydraulic Turbines in Muddy River Based on Discrete Phase Model

Numerical prediction of erosion of Francis turbine in sediment laden flow

Experimental and Numerical Studies on Erosion Damage in Damping Holes on the Valve Plate of an Axial Piston Pump

Quantitative Prediction of Wear Failure Based on Dissipative Methodology under Dry Friction

Numerical Prediction of Erosion of Francis Turbine in Sediment-Laden Flow under Different Heads

Research on Wear Prediction of Piston/cylinder Pair in Axial Piston Pumps

Prediction of sediment wear of francis turbine with high head and high sediment content

Modelling and fatigue reliability investigation on wear prediction of piston/cylinder pair based on friction fatigue mechanism

Development of a DEM Method for Predicting Wear Distribution on Particle Scale

Enhanced Wear Prediction of Tunnel Boring Machine Disc Cutters for Accurate Remaining Useful Life Estimation Using a Hybrid Model

Numerical simulation of multiphase flow and prediction of sediment wear in a large Pelton turbine

The Development of Study on the Abrasive Rules and Anti-Abrasive Technique of Hydraulic Machines

Prediction of Abrasive and Impact Wear Due to Multi-Shaped Particles in a Centrifugal Pump via CFD-DEM Coupling Method

Silt abrasion prediction of hydraulic machine components by two-fluid model

Numerical Investigation of Erosion Wear Characteristics of Hydraulic Spillway

Computational Methods of Erosion Wear in Centrifugal Pump: A State-of-the-Art Review

Numerical simulation and abrasion prediction of two-phase turbulent flows through hydraulic turbine guide vanes