Abstract:Reducing frictional losses in response to the energy agenda will require use of less viscous lubricants causing hydrodynamically-lubricated bearings to operate with thinner films leading to "mixed lubrication" conditions in which a degree of direct interaction occurs between surfaces protected only by boundary tribofilms. The paper considers the consequences of thinner films and mixed lubrication for concentrated contacts such as those occurring between the teeth of power transmission gears and in rolling element bearings. Surface fatigue in gears remains a serious problem in demanding applications, and its solution will become more pressing with the tendency towards thinner oils. The particular form of failure examined here is micropitting, which is identified as a fatigue phenomenon occurring at the scale of the surface roughness asperities. It has emerged recently as a systemic difficulty in the operation of large scale wind turbines where it occurs in both power transmission gears and their support bearings. Predictive physical modelling of these contacts requires a transient mixed lubrication analysis for conditions in which the predicted lubricant film thickness is of the same order or significantly less than the height of surface roughness features. Numerical solvers have therefore been developed which are able to deal with situations in which transient solid contacts occur between surface asperity features under realistic engineering conditions. Results of the analysis, which reveal the detailed time-varying behaviour of pressure and film clearance, have been used to predict fatigue and damage accumulation at the scale of surface asperity features with the aim of improving understanding of the micropitting phenomenon. The possible consequences on fatigue of residual stress fields resulting from plastic deformation of surface asperities is also considered.

An engineering approach for the prediction of wear in mixed lubricated contacts

Numerical Prediction of Wear Process of an Initial Line Contact in Mixed Lubrication Conditions

Micropitting Fatigue Wear Simulation in Conformal-Contact under Mixed Elastohydrodynamic Lubrication

Numerical Prediction of Surface Wear and Roughness Parameters During Running-In for Line Contacts under Mixed Lubrication

Predictive Modeling of Surface Wear in Mechanical Contacts under Lubricated and Non-Lubricated Conditions

Research on Wear Prediction of Piston/cylinder Pair in Axial Piston Pumps

A lubricated wear model for determining wear surface geometry on journal-bearing surfaces

Numerical Analysis of Elastic Wear in Line Contact

Predictive modelling of fatigue failure in concentrated lubricated contacts

Mixed Elastohydrodynamic Lubrication in Finite Roller Contacts Involving Realistic Geometry and Surface Roughness

A Deterministic Mixed Lubrication Model for Parallel Rough Surfaces Considering Wear Evolution

A computationally efficient method for the prediction of fretting wear in practical engineering applications

Simulation of Sliding Wear in Mixed Lubrication

A Comprehensive Method for Joint Wear Prediction in Planar Mechanical Systems with Clearances Considering Complex Contact Conditions

Modeling and simulation for wear prediction in planar mechanical systems with multiple clearance joints

Computer Simulation/Prediction of Wear in Mechanical Components

Abrasive Wear Model for Lubricated Sliding Contacts

Numerical Analysis of Time-Varying Wear with Elastic Deformation in Line Contact

Wear prediction for metals

Numerical Study of Coupled Electrical-Thermal-Mechanical-Wear Behavior in Electrical Contacts

Prediction of Wear at Revolute Clearance Joints in Flexible Mechanical Systems