Abstract:Surface wear, as a major failure mode of gear systems, is an unavoidable phenomenon during the whole life of gears. It also induces other gear damages, such as fatigue cracks, surface pitting and spalling. Ultimately, those defects may result in the sudden failure of a gearbox transmission system, which can lead to a serious accident and unexpected economic loss. Therefore, it can provide huge cost and safety benefits to industries to monitor gear wear and predict its propagation. Gear wear raises the error rate of gear transmission systems, typically leading to improvements in dynamic loads, vibration, and noise. In return, the increased load conversely aggravates wear, creating a feedback cycle between dynamic responses and surface wear. For this purpose, a wear prediction model was incorporated into a tribo-dynamic model for quantitatively investigating how surface wear and gear vibration are mutually affected by each other. To obtain more precise dynamic responses, the tribo-dynamic model integrates the time-varying mesh stiffness, load-sharing ratio and friction parameters. To improve the computational efficiency and guarantee the calculation precision, an improved and updated wear depth methodology is constructed in the wear prediction model. This paper demonstrates the capability of the proposed dynamic wear prediction model in the investigation of the interaction effects between gear dynamics and surface wear, allowing for the development of improved gear wear prediction tools. The obtained results indicate that the surface wear impacts the dynamic characteristics, even with slight wear. In the initial stage of wear, the friction coefficient decreases slightly, largely due to the reduction in surface roughness; but the friction force increases because of the improved dynamic meshing force. Although the initial wear depth distributions of a pinion under dynamic and static conditions are similar, the wear depth distributions under dynamic conditions becomes significantly different compared to the those under static conditions with the wear process. The maximum wear depth of a pinion under dynamic conditions is about 1.6 times as the corresponding static conditions, when the wear cycle comes to . Similarly, the maximum accumulative wear depth of a pinion under dynamic conditions reaches 1.2 times of that under static conditions. Therefore, the proposed dynamic wear prediction model is more appropriate to be applied to the surface wear of gears.

Predictive Modeling of Surface Wear in Mechanical Contacts under Lubricated and Non-Lubricated Conditions

Modeling and simulation of wear for alignment mechanism of large aircraft component

Experimental assessment of multiple contact wear using airborne noise under dry and lubricated conditions

Wear and Airborne Noise Interdependency at Asperitical Level: Analytical Modelling and Experimental Validation

Limitations in the existing models for predicting accurate interdependencies between wear and friction noise,

An engineering approach for the prediction of wear in mixed lubricated contacts

Machine Learning Algorithms for Predicting Wear Rates on the Basis of Friction Noise

Research on Wear Prediction of Piston/cylinder Pair in Axial Piston Pumps

A Contact Mechanics Model for Surface Wear Prediction of Parallel-Axis Polymer Gears

Acoustic emission and machine learning based classification of wear generated using a pin-on-disc tribometer equipped with a digital holographic microscope

Numerical Prediction of Surface Wear and Roughness Parameters During Running-In for Line Contacts under Mixed Lubrication

Computer Simulation/Prediction of Wear in Mechanical Components

Predictive modelling of fatigue failure in concentrated lubricated contacts

Modeling and simulation for wear prediction in planar mechanical systems with multiple clearance joints

A Dynamic Wear Prediction Model for Studying the Interactions between Surface Wear and Dynamic Response of Spur Gears

Numerical Prediction of Wear Process of an Initial Line Contact in Mixed Lubrication Conditions

Prediction of Friction Power via Machine Learning of Acoustic Emissions from a Ring-on-Disc Rotary Tribometer

A Comprehensive Method for Joint Wear Prediction in Planar Mechanical Systems with Clearances Considering Complex Contact Conditions

Surface Wear Rate Prediction in Reinforced AA2618 MMC by Employing Soft Computing Techniques

Predicting the coefficient of friction in a sliding contact by applying machine learning to acoustic emission data

Experimental Analysis and Wear Prediction Model Based on Friction Heat for Dry Sliding Contact