Abstract:Nanocellulose-based porous materials have been recently considered as ideal candidates in various applications. However, challenges on performances remain owing to the disorderly structure and the limited transport specificity. Herein, wood-inspired composite sponges consisting of cellulose nanofibrils (CNFs) and high-aspect-ratio silver nanowires (AgNWs) were generated with anisotropic properties by the directional freeze-drying. The obtained composite sponges exhibited attractive features, such as an excellent compressive stress of 24.5 kPa, low percolation threshold of 0.1 vol % AgNWs, and high electrical conductivity of 1.52 S/cm. Furthermore, the self-assembled ordered structure in the longitudinal direction and synergistic effect between CNFs and AgNWs benefited the sponge interesting anisotropic electrical conductivity, thermal diffusivity, ultrafast electrically induced heating (<5 s), sensitive pressure sensing (errors <0.26%), and electromagnetic interference (EMI) shielding for special practical demands. This multifunctional material inspired by natural woods is expected to broaden new applications as electronic devices for an intelligent switch or EMI shielding.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c10645?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c10645</a>.Characterizations of raw materials (Figure S1); the stability of the precursor dispersions (Figure S2); SEM images of conductive CA-d sponges with 0.4 and 0.5 vol % AgNWs (Figure S3); SEM images of conductive CA-n sponges with different volume fractions of AgNWs (Figure S4); the pore distributions and XRD patterns of conductive sponges (Figure S5); resistance values of CA-d-longitudinal sponges with different volume fractions of AgNWs (Figure S6); the dependence of the conductivity (σ) on the volume fraction of AgNWs (Figure S7); resistance values of CA-d-transverse sponges with different volume fractions of AgNWs (Figure S8); resistance values of CA-n sponges with different volume fractions of AgNWs (Figure S9); density and porosity of CA-d (Table S1); the summary of density and EMI parameters for typical porous materials (Table S2); comparison between true and experimental values (Table S3) (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c10645/suppl_file/am0c10645_si_001.pdf">PDF</a>)Simulation of EMI shielding application of the sponge of CA-d-0.3 without an iron cover, and with an iron cover, respectively (Video S1) (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c10645/suppl_file/am0c10645_si_002.avi">AVI</a>)Simulation of EMI shielding application of the sponge of CA-d-0.3 with an iron cover having an unobstructed hole, and with an iron cover having a hole covered with an iron sheet, respectively (Video S2) (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c10645/suppl_file/am0c10645_si_003.avi">AVI</a>)Simulation of EMI shielding application of the sponge of CA-d-0.3 with an iron cover having a hole covered with the longitudinal plane of the sponge, and with an iron cover having a hole covered with the transverse plane of the sponge, respectively (Video S3) (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c10645/suppl_file/am0c10645_si_004.avi">AVI</a>)This article has not yet been cited by other publications.

Aminosilane-modified wood sponge for efficient CO2 capture

Scalable and Sustainable Approach Toward Highly Compressible, Anisotropic, Lamellar Carbon Sponge

Facile synthesis and biomimetic amine-functionalization of chitosan foam for CO2 capture

Deep eutectic solvent assisted preparation of ZnO deposited carbonized wood for efficient CO 2 storage and oil absorption

Wood-Inspired Ultrafast High-Performance Adsorbents for CO 2 Capture

Design of biomass-based N, S co-doped porous carbon via a straightforward post-treatment strategy for enhanced CO2 capture performance

Sponges with covalently tethered amines for high-efficiency carbon capture

ZIF-8-decorated wood sponge derived from biomimetic mineralization of polydopamine

Structurally Designed Synthesis of Mechanically Stable Poly(benzoxazine-co-resol)-Based Porous Carbon Monoliths and Their Application As High-Performance CO2 Capture Sorbents

Resorcinol–formaldehyde Resin-Based Porous Carbon Spheres with High CO2 Capture Capacities

Polyethyleneimine modified porous wood ceramics for efficient and high-capacity adsorption of CO 2 in simulated gases

Synthesis and characterization of three-dimensional interconnected large-pore mesoporous cellular lignin carbon materials and their potential for CO 2 capture

Flexible, amine-modified silica aerogel with enhanced carbon dioxide capture performance

A cost-effective synthesis of heteroatom-doped porous carbon by sulfur-containing waste liquid treatment: As a promising adsorbent for CO2 capture

Lignin-Based Porous Supraparticles for Carbon Capture

Sustainable Porous Carbon Materials Derived from Wood-Based Biopolymers for CO2 Capture

Functionalized wood sponges: Advanced biomass materials for renewable energies, freshwater production, energy storage, and environmental remediation

Amine functionalized mesocellular silica foam as highly efficient sorbents for CO2 capture

Waste foam to upcycled sponge-like porous carbon composites for efficient CO 2 capture and conversion

Wood-Inspired Anisotropic Cellulose Nanofibril Composite Sponges for Multifunctional Applications

Selectable Microporous Carbons Derived from Poplar Wood by Three Preparation Routes for CO 2 Capture