Abstract:Removal and sequestration of CO2 from flue gas has been proposed as one of the most reliable solutions to mitigate globe greenhouse emissions. Adsorption technology based on porous adsorbent is known to be one of the most efficient processes for the CO2 capture from flue gas. The key issue of this technology is to find the adsorbent with high adsorption capacity and selectivity for CO2. In this chapter, both the experimental and the computer simulation works about the CO2 adsorption behavior on porous materials in our laboratory were introduced. In the experimental works, the mesoporous materials such as MCM-41 and SBA-15 were selected as the fundamental adsorbent. After surface modification by aminosilane, the amine groups became active centers and the CO2 adsorption capacity was obviously increased due to the chemisorption. It is shown that the dual amine groups of AEAPMDS had better effect on CO2 adsorption than the single amine group of APTS. The best CO2 adsorption capacity of MCM-41-AEAPMDS was 2.20 mmol.g(-1) at room temperature. Another effective way was incorporation metal Mg into the mesoporous materials. By various impregnating or doping methods, such as the co-condensation, the dispersion with the enhancement of Al3+ or amine, and the ionic exchange, a suitable amount of Mg2+ can be successfully introduced into MCM-41 and SBA-15, which effectively increased the CO2 adsorption capacity. Different pore structures had their corresponding optimized methods, the real reason behind was the highly dispersed MgO state in the channels. The best CO2 adsorption capacities of Mg-Al-SBA-15-D1 and Mg-EDA-MCM-41-D10 were about 1.35 mmol.g(-1). In the simulation works, some novel porous materials such as the micro/mesoporous composite, the covalent organic frameworks, the metal organic framework and the zeolitic imidazolate frameworks were selected as the potential adsorbents for the CO2 capture. The CO2 adsorption behavior of the zeoilte of MFI, the mesoporous MCM-41 and the micro/mesoporous composite of MFI/MCM-41 were simulated and compared. It is revealed that the micro/mesoporous composite had better performances on the CO2 adsorption capacity and selectivity at high pressure, as well as the diffusion performance.

Polyethyleneimine modified porous wood ceramics for efficient and high-capacity adsorption of CO 2 in simulated gases

Polyethylenimine-Grafted Hkust-Type Mof/Poiyhipe Porous Composites (Pei@Pgd-H) As Highly Efficient Co(2 )Adsorbents

Polyethyleneimine-Modified UiO-66-NH2(Zr) Metal–Organic Frameworks: Preparation and Enhanced CO2 Selective Adsorption

Wood-Inspired Ultrafast High-Performance Adsorbents for CO 2 Capture

Effect of Additives on CO2 Adsorption of Polyethylene Polyamine-Loaded MCM-41

Cost-effective carbon-based amine adsorbents for carbon capture: Equilibrium, kinetics and selectivity

CO2 Adsorption by Polyamine-Based Protic Ionic Liquid-Functionalized Mesoporous Silica: Regenerability and Influence of Flue Gas Contaminants

Breakthrough analysis on selective adsorption of CO2 from biogas by polyethylenimine-impregnated resins

Experimental testing and mechanism investigation of amine-functionalized layered vermiculite for CO 2 capture

A surfactant modified solid amine adsorbent to enhance CO 2 adsorption performance

The effect of humidity on the enhanced CO2 adsorption of amine-functionalized microporous activated carbon

Preparation of porous CO 2 adsorbent with high amine-content matrix by unique emulsion template

Co2 Adsorption on Porous Materials: Experimental and Simulation Study

Polyethylenimine-impregnated resin for high CO2 adsorption: an efficient adsorbent for CO2 capture from simulated flue gas and ambient air.

Physicochemical synergistic adsorption of CO2 by PEI‐impregnated hierarchical porous polymers

Co-grafting of polyethyleneimine on facilely synthesized mesoporous P(DVB-D) for highly effective CO 2 adsorption and enhanced oxidation resistance

Polyethylenimine-Impregnated Siliceous Mesocellular Foam Particles As High Capacity Co2 Adsorbents

A novel preparation of solid amine sorbents for enhancing CO2 adsorption capacity using alumina-extracted waste

An economical-friendly biomass-based porous carbon with chitosan modification for the favorable adsorption of CO2 and toluene

Enhanced Selective Co2 Adsorption On Polyamine/Mil-101(Cr) Composites

Easily-synthesized and low-cost amine-functionalized silica sol-coated structured adsorbents for CO2 capture