Abstract:In this study, a new heat‐treatment process is proposed to optimize the volume fraction and stability of retained austenite (RA) in multi‐alloyed steel. The resulting excellent mechanical properties are due to the enhanced transformation‐induced plasticity (TRIP) effect and increased work‐hardening rate. The stability of RA also provides sustainable TRIP toughening during cryogenic impact deformation, helping to arrest crack propagation. There is a general inverse relationship between strength and toughness in low‐carbon steels. The transformation‐induced plasticity (TRIP) effect of retained austenite (RA) can help overcome this contradiction by providing strain hardening and transformation toughening during service. In this study, the effect of RA on the microstructure evolution, cryogenic mechanical properties, and fracture behavior of multi‐alloyed Ni‐containing steel is explored. Two well‐established techniques are employed to tailor the RA: quenching–intercritical tempering (QIT) and quenching–lamellarizing–intercritical tempering (QLIT). QLIT steel has a 25.1 vol% RA fraction, which is twice that of QIT steel, and offers exceptional stability at –196 °C. As a result, QLIT steel exhibits superior cryogenic mechanical properties in comparison to QIT steel, including a 6.9% increase in yield strength up to 1228 MPa, a 36.6% increase in elongation up to 33.2%, and a 147.4% increase in impact energy up to 193 J. These improvements are due to the higher fraction of RA transformed into the martensite during tensile deformation, resulting in an enhanced TRIP effect and increased work‐hardening rate. The exceptional stability of the RA also provides more sustainable TRIP toughening during cryogenic impact deformation, which helps to arrest crack propagation.

Effect of Deep Cryogenic Treatment on the Microstructure and Wear Resistance of a Novel Nanobainite Steel

Effects of deep cryogenic treatment on the microstructure and mechanical properties of an ultrahigh-strength TRIP-aided bainitic steel

Effect of Austempering Temperature on Microstructure Evolution, Mechanical Properties and Wear Resistance of Carbon-free Nano-bainite Steel

Effects of traditional heat treatment and a novel deep cryogenic treatment on microstructure and mechanical properties of low-carbon high-alloy martensitic bearing steel

Effect of multiple deep cryo-treating and tempering on microstructure and property evolution of high carbon bearing steel

Enhancing the Wear Resistance of 100Cr6 Bearing Steel Using Cryogenic Treatment

Refinement of Retained Austenite in Super-Bainitic Steel by A Deep Cryogenic Treatment

The Strengthening Role of Cryogenic Treatment in the Mechanical Properties and Abrasive Wear of Low Alloy Wear-Resistant Steel

Effect of Pulsed Magnetic Field on Retained Austenite of Quenched 8cr4mo4v Steel under Cryogenic Condition

Comparison on Wear Resistance of Nanostructured Bainitic Bearing Steel with and Without Residual Cementite

Deep Cryogenic Treatment Improves Wear Resistance of En 31 Steel

Effect of Deep Cryogenic Treatment on Wear Behavior of Cold Work Tool Steel

Effect of Deep Cryogenic Treatment on Dilatometric Curve and Tribological Properties of High Speed Steel

Effect of Heat Treatment on Microstructure and Mechanical Properties of Nb-containing Cryogenic Steels

Microstructures and Mechanical Properties of a Modified High-C–cr Bearing Steel with Nano-Scaled Bainite

Effect of tempering and deep cryogenic treatment on microstructure and mechanical properties of Cr–Mo–V–Ni steel

Effect of deep cryogenic treatment on martensitic lath refinement and nano-twins formation of low carbon bearing steel

Improving the Cryogenic Strength–Ductility–Toughness of Multi‐Alloy Steel by Optimizing the Feature of Retained Austenite

Effect of Deep Cryogenic Treatment on the Carbide Precipitation and Tribological Behavior of D2 Steel

Effect of Short-Term Low-Temperature Austempering on the Microstructure and Abrasive Wear of Medium-Carbon Low-Alloy Steel