Abstract:In this study, the multi-stage heat treatment involving quenching (Q), lamellarizing (L), cryogenic (C) and tempering (T) is applied in marine 10Ni5CrMoV steel to study the microstructure and mechanical properties by multi-scale characterizations. Strengthening mechanism, strain hardening behavior and cryogenic toughening mechanism are further investigated. The results indicate that cryogenic treatment induces lattice distortion in martensite, resulting in significant internal stress. This process leads to the shrinkage of the laths, thereby reducing the equivalent grain size of the specimen. The combined cryogenic and tempering process induces continuous martensitic transformation, resulting in a reduction of the austenite volume fraction and dislocation density. The strong internal stress accelerates the movement of defects (dislocations) to grain boundaries. It promotes the precipitation of numerous alloy elements in the form of carbides at these defects, causing a significant decrease in solution strengthening. This is the primary reason why the yield strength of the QLCT specimen is reduced from 889.5 ± 7.8 MPa to 838.5 ± 7.4 MPa compared to the QLT specimen. The QLCT specimen exhibits a single stage strain hardening behavior during plastic deformation and possesses strong strain hardening ability and good machinability. This is attributed to the interaction between fine precipitates and dislocations. During the cryogenic impact process, secondary lattice distortion occurs in the QLCT specimen, further refining the precipitates. This enhances the pinning effect on grain boundaries and dislocations, improving the ability to hinder crack propagation. Consequently, the impact energy of the QLCT specimen increases from 264.3 ± 6.4 J to 278.7 ± 6.3 J at -84 °C, compared to the QLT specimen. Graphical

The Strengthening Role of Cryogenic Treatment in the Mechanical Properties and Abrasive Wear of Low Alloy Wear-Resistant Steel

Study on the role of cryogenic treatment on corrosion and wear behaviors of high manganese austenitic steel

Effects of traditional heat treatment and a novel deep cryogenic treatment on microstructure and mechanical properties of low-carbon high-alloy martensitic bearing steel

Effect mechanism of cryogenic treatment on ferroalloy and nonferrous alloy and their weldments: A review

Effect of multiple deep cryo-treating and tempering on microstructure and property evolution of high carbon bearing steel

Study of Cryogenic Treatment on the Microstructure and Mechanical Properties of Marine 10Ni5CrMoV Steel

Enhancing Ductility of Martensitic Steels Through Cryogenic Treatment

EFFECTS OF CRYOGENIC TREATMENT ON MICROSTRUCTURE AND WEAR RESISTANCE OF Fe-0.35C-6.3Cr MARTENSITIC STEEL

Effects of deep cryogenic treatment on microstructural evolution and alloy phases precipitation of a new low carbon martensitic stainless bearing steel during aging

The strengthening role of post-welded cryogenic treatment on the performance and microstructure of 304 austenitic stainless steel weldments

Enhancing the Wear Resistance of 100Cr6 Bearing Steel Using Cryogenic Treatment

Influence of cryogenic treatment on the wear characteristics of 100Cr6 bearing steel

Effect of Cryogenic Treatment on the Mechanical Properties of Alloy Steel 16MnCr5

Cryogenic Treatment of Martensitic Steels: Microstructural Fundamentals and Implications for Mechanical Properties and Wear and Corrosion Performance

Achieving synergistic improvement of wear and mechanical properties in Ti–6Al–4V alloy by multiple cryogenic treatment

Effect of Deep Cryogenic Time on the Microstructure and Mechanical Property of Cr-Mn-Si High-Strength Alloy Steel

Deep Cryogenic Treatment Improves Wear Resistance of En 31 Steel

Experimental Investigation on the Effect of Deep Cryogenic Treatment on 100Cr6 Bearing Steel

Influence of Cryogenic Treatment on the Corrosion Properties of 42CrMo Low Alloy Steel

Effect of Short-Term Low-Temperature Austempering on the Microstructure and Abrasive Wear of Medium-Carbon Low-Alloy Steel