Abstract:Three-dimensional (3D) micro -nano fabrication through two -photon polymerization (TPP) is a prominent approach for fabricating complex 3D structures. However, the existing techniques face limitations, such as small fabrication area, dependence on high numerical aperture (e.g., oil immersion) objective lenses, which are more expensive. We developed a 780 nm fs laser system integrated with a 2D galvanometer system and Z axis to create a 3D micro -nano printing system. A method to print arbitrarily complex 3D structures while maintaining an extremely high lateral spatial resolution of sub-100nm is proposed by using a cheap low numerical aperture objective lens with the laser power and exposure time precisely controlled. The impact of the laser power and exposure time on the resolution of 3D micro -nano processing is investigated, and we identify the optimal processing environment for achieving the best resolution. The printed linewidth of 62 nm was achieved without the use of an oil immersed objective lens, and only one laser beam was used instead of stimulated emission depletion. Microneedle arrays for animal injection were fabricated using this strategy, which can improve the performance of animal organoid repair. Our results suggest that TPP micro -nano fabrication is an effective method for processing microneedle arrays for biomedical engineering, with the ability to improve the processing resolution with a cheap low numerical aperture objectives lens (e.g., NA = 0.4) through meticulous control of laser power and exposure time. This approach opens up possibilities for affordable and scalable fabrication in sub-100nm structures.

Generation of Bessel-beam arrays for parallel fabrication in two-photon polymerization

High-speed two-photon lithography based on femtosecond laser

Fabrication of High-Aspect-ratio Structures Using Bessel-beam-activated Photopolymerization

Two-photon Polymerization of Microstructures by a Non-Diffraction Multifoci Pattern Generated from a Superposed Bessel Beam.

Two-Photon Polymerization of Cylinder Microstructures by Femtosecond Bessel Beams

Rapid two-photon polymerization of arbitrary 3D microstructure with femtosecond laser 3D focal field engineering

Micro- and Nanofabrication Using Bessel-beam Activated Photopolymerization

Amplitude-phase Optimized Long Depth of Focus Femtosecond Axilens Beam for Single-Exposure Fabrication of High-Aspect-ratio Microstructures

Abruptly Autofocusing Vortex Beams for Rapid Controllable Femtosecond Two-Photon Polymerization

Parallel Direct Laser Writing of Micro-Optical and Photonic Structures Using Spatial Light Modulator

Two-photon Polymerization of a Three Dimensional Structure Using Beams with Orbital Angular Momentum

Ultrafast multi-focus 3-D nano-fabrication based on two-photon polymerization

Projection two-photon polymerization using a spatial light modulator

High-Throughput Two-Photon 3D Printing Enabled by Holographic Multi-Foci High-Speed Scanning

Spatiotemporal Reaction Dynamics Control in Two‐Photon Polymerization for Enhancing Writing Characteristics

Rapid Two‐Photon Polymerization of an Arbitrary 3D Microstructure with 3D Focal Field Engineering

Individually Controlled Multi-Focus on a Line for Two-Photon Polymerization Based on Computer-Generated Holograms

Fabrication Of Three Dimensional Micro Devices By Means Of Two Photon Photopolymerization

Pinpoint Two-Photon Writing And Multi-Beam Interferential Patterning Of Three-Dimensional Polymer Photonic Crystals

Automated brightfield layerwise evaluation in three-dimensional micropatterning via two-photon polymerization

Fabrication of Microneedles Using Two Photon-Polymerization with Low Numerical Aperture