Abstract:This article reports a novel laser-induced micro-fabrication method and its monitoring system for three-dimensional (3D) microstructures. The mechanism of the method is that a small zone of thermoplastic material melted by laser heating grows in liquid surrounding environment, solidifying into a convex microstructure, such as micro-dot or micro-pillar. A laser diode (808 nm) with maximum power output of 130 mW is used as power source, and a kind of paraffin mixed with stearic acid and paint serves as the thermoplastic material for 3D microstructure formation experiments. A light microscope system consisting of a charge-coupled device (CCD) and a computer is utilized to realize real-time observation of the micro-fabricating process. The distribution of local temperature rise on material surface created by laser irradiation is simulated. The effects of liquid environment on microstructure formation have been theoretically analyzed and experimentally studied. Experiments are further carried out to investigate the relationship between laser spot and fabricated microstructures. The results indicate that the widths of microdots or micro-pillars are mostly determined by the size of focal spot, and their heights increase with the enlargement of laser power density. With this method, a micro-dot array of Chinese characters meaning "China" has been successfully fabricated through computer programming. This method has the advantages of implementing direct, mask-less, real-time and inexpensive 3D microstructure fabrication. Therefore, it would be widely applied in the fields of micro/nano-technology for practical fabrication of different kinds of 3D microstructures. Microsc. Res. Tech. 72:717-722, 2009. (C) 2009 Wiley-Liss, Inc.

Micro- and Nanofabrication Using Bessel-beam Activated Photopolymerization

Fabrication of High-Aspect-ratio Structures Using Bessel-beam-activated Photopolymerization

Beyond 100 nm Resolution in 3D Laser Lithography: Post Processing Solutions

Photolithography Using Lateral Surface of Nanofibers

Micro-fabrication technology by femtosecond laser direct scanning using two-photon photo-polymerization

Generation of Bessel-beam arrays for parallel fabrication in two-photon polymerization

Rapid Two‐Photon Polymerization of an Arbitrary 3D Microstructure with 3D Focal Field Engineering

Recent Progress of Lithographic Micro Fabrication by the Tpa-Induced Photopolymerization

Micro-Fabrication and Monitoring of Three-Dimensional Microstructures Based on Laser-Induced Thermoplastic Formation

Abruptly Autofocusing Vortex Beams for Rapid Controllable Femtosecond Two-Photon Polymerization

Fabrication Of Three Dimensional Micro Devices By Means Of Two Photon Photopolymerization

Improved Spatial Resolution And Surface Roughness In Photopolymerization-Based Laser Nanowriting

Photonic Crystal Structures with Submicrometer Spatial Resolution Achieved by High-Power Femtosecond Laser-Induced Photopolymerization

Fabrication of micro-structures for optically driven micromachines using two-photon photopolymerization of UV curing resins

Surface Nano-fabrication by Laser Precision Engineering

Micro/nanofabrication of Two and Three Dimensional Structures by Two-Photon Polymerization

Single-photon and two-photon photopolymerization for micro-nano fabrication

Femtosecond Laser Nano/microfabrication Via Three-Dimensional Focal Field Engineering

High-Throughput Volumetric Microfabrication with Structured Light

Ultrafast Large Area Micropattern Generation in Non-absorbing Polymer Thin-Films by Pulsed Laser Diffraction

Experimental Investigation of the Rapid Fabrication of Micron and Submicron Structures on Polymers Utilizing Ultrasonic Assisted Embossing