Abstract:All-solid-state lithium batteries (ASSLBs) are considered a promising technology for next-generation energy storage systems due to their inherent safety. However, the conventional laboratory-scale ASSLBs reported to date are based on pellet-type structures with thick solid electrolyte layers, leading to challenges related to low energy densities and poor electrochemical performance. In this study, porous adhesive poly(ethylene vinyl acetate) (PEVA) scaffolds and polytetrafluoroethylene (PTFE) binders are utilized to interweave sulfide solid electrolytes into freestanding films with an ultra-low thickness of 40 mu m, high ionic conductivity of 1.1 mS cm-1, and a high tensile strength of 74 MPa. To mitigate the reduction reaction between the PTFE binder and the lithium metal anode, a Li3N-rich solid electrolyte interphase (SEI) in situ on lithium metal is formed, and the assembled symmetric cell shows excellent cycling stability within 800 h at the current density of 0.2 mA cm-2 and room temperature. Additionally, the ASSLBs using oxidatively stable Li2ZrCl5F in the composite cathode and the prepared solid electrolyte film demonstrate exceptional cycling performance and fast-charging capability, with a high cell-level energy density of 354.4 Wh kg-1. The ASSLBs prepared by coupling E-LPSCl film and stable interface design exhibit excellent electrochemical performance and a high cell-level energy density. Porous sticky poly(ethylene vinyl acetate) (PEVA) scaffold and polytetrafluoroethylene (PTFE) are utilized to interweave sulfide solid electrolytes into freestanding films with ultralow thickness, high ionic conductivity, and remarkable mechanical strength. Benefiting from high-performance sulfide film and designed solid electrolyte interphase on Li metal, the assembled symmetric cells and all-solid-state cells displayed excellent cycling stability. image

Cold sintering, enabling a route to co-sinter an all-solid-state lithium-ion battery

Cold Sintering–a New Approach to Reprocess Composite Electrolytes in All-Solid-State Lithium-Ion Battery

A dry cold sintering to Ta doped-lithium lanthanum zirconate solid electrolyte for all-solid-state lithium metal battery

High areal capacity, long cycle life 4 V ceramic all-solid-state Li-ion batteries enabled by chloride solid electrolytes

Inorganic all-solid-state lithium-sulfur batteries enhanced by facile thermal formation

Cold-sintering assisted process enables densified and robust fine-grained Li1.3Al0.3Ti1.7(PO4)3 electrolytes for solid-state batteries

All-Solid-State Lithium Metal Batteries Enabled by Solid Electrolytes with Low-Temperature Processability

Development of the Cold Sintering Process and Its Application in Solid-State Lithium Batteries

Enabling long-term oxide based solid-state lithium metal battery through a near room-temperature sintering process

Boosting the energy density of sulfide-based all-solid-state batteries at low temperatures by charging to high voltages up to 6 V

Broad temperature dependence, high conductivity, and structure-property relations of cold sintering of LLZO-based composite electrolytes

Reduced Sintering Temperatures of Li+ Conductive Li1.3Al0.3Ti1.7(PO4)3 Ceramics

In situ curing enables high performance all-solid-state lithium metal batteries based on ultrathin-layer solid electrolytes

Versatile Inorganic/Polymer Composite Electrolyte Added with 2-Methylsuccinic Anhydride via a Solvent-Free Preparation Method for High-Performance All-Solid-State Li-Metal Batteries: High Voltage, Long Cycle Life, and Room-Temperature Operation

Insight into the Microstructure and Ionic Conductivity of Cold Sintered NASICON Solid Electrolyte for Solid-State Batteries

A highly utilized and practical lithium-sulfur cathode enabled in all-solid-state batteries

Ultraconformal chemo-mechanical stable cathode interface for high-performance all-solid-state batteries at wide temperatures

High-areal-capacity and long-cycle-life all-solid-state battery enabled by freeze drying technology

In-situ formed decrystallized interphase enabled high performance all-in-one all-solid-state batteries

High Capacity And Superior Cyclic Performances Of All-Solid-State Lithium-Sulfur Batteries Enabled By A High-Conductivity Li10snp2s12 Solid Electrolyte

High Ionic Conductive, Mechanical Robust Sulfide Solid Electrolyte Films and Interface Design for All‐Solid‐State Lithium Metal Batteries