Abstract:All‐solid‐state batteries (ASSBs) promise high energy density and safety, but as most research is focusing on optimizing individual components, their impact on key performance parameters is often disregarded. This review evaluates market‐available solid electrolyte separators and electrode materials, suggesting, that while thick oxide electrolytes fall short, thinner separators combined with recently presented composite cathode designs can outperform current lithium‐ion batteries, achieving energy densities up to 400 Wh/kg . The all‐solid‐state battery (ASSB) concept promises increases in energy density and safety; consequently recent research has focused on optimizing each component of an ideal fully solid battery. However, by doing so, one can also lose oversight of how significantly the individual components impact key parameters. Although this review presents a variety of materials, the included studies limit electrolyte‐separator choices to those that are either fully commercial or whose ingredients are readily available; their thicknesses are predefined by the manufacturer or the studies in which they are included. However, we nevertheless discuss both electrode materials. Apart from typical materials, the list of anode materials includes energy‐dense candidates, such as lithium metal, or anode‐free approaches that are already used in Li‐ion batteries. The cathode composition of an ASSB contains a fraction of the solid electrolyte, in addition to the active material and binders/plasticizers, to improve ionic conductivity. Apart from the general screening of reported composites, promising composite cathodes together with constant‐thickness separators and metallic lithium anodes are the basis for studying theoretically achievable gravimetric energy densities. The results suggest that procurable oxide electrolytes in the forms of thick pellets (>300 μm) are unable to surpass the performance of already commercially available Li‐ion batteries. All‐solid‐state cells are already capable of exceeding the performance of current batteries with energy densities of 250 Wh kg−1 by pairing composite cathodes with high mass loadings and using separators that are less than 150 μm thick, with even thinner electrolytes (20 μm) delivering more than 350 Wh kg−1.

Cathode-Supported All-Solid-State Lithium–Sulfur Batteries with High Cell-Level Energy Density

High Ionic Conductive, Mechanical Robust Sulfide Solid Electrolyte Films and Interface Design for All‐Solid‐State Lithium Metal Batteries

A highly utilized and practical lithium-sulfur cathode enabled in all-solid-state batteries

Free-standing Sulfide/polymer Composite Solid Electrolyte Membranes with High Conductance for All-Solid-state Lithium Batteries

Rational Designed Mixed-Conductive Sulfur Cathodes for All-Solid-State Lithium Batteries

An Electron/Ion Dual Conductive Integrated Cathode Using Cationic/Anionic Redox for High‐Energy‐Density All‐Solid‐State Lithium‐Sulfur Batteries

High Energy Density Solid State Lithium Metal Batteries Enabled by Sub‐5 Μm Solid Polymer Electrolytes

A facile path from fast synthesis of Li-argyrodite conductor to dry forming ultrathin electrolyte membrane for high-energy-density all-solid-state lithium batteries

Ultrathin, Flexible Polymer Electrolyte for Cost‐Effective Fabrication of All‐Solid‐State Lithium Metal Batteries

All‐solid‐state Li‐ion batteries with commercially available electrolytes: A feasibility review

High-Performance Sulfide All-Solid-State Batteries Enabled by High-Voltage Ni-Rich Cathode with a Conformal and Conductive Protective Layer

Li 2 S-Based Composite Cathode with in Situ-Generated Li 3 PS 4 Electrolyte on Li 2 S for Advanced All-Solid-State Lithium-Sulfur Batteries

Sulfide Solid Electrolyte Thin Film with High Ionic Conductive from Slurry-Casting Strategy for All-Solid-state Lithium Batteries

A Large‐Scale Fabrication of Flexible, Ultrathin, and Robust solid Electrolyte for Solid‐State Lithium‐Sulfur Batteries

Totally Compatible P4S10+n Cathodes with Self-Generated Li+ Pathways for Sulfide-Based All-Solid-state Batteries

Conductive Li2S-NbSe2 Cathode Material Capable of Bidirectional Self-Activation for High-Performance All-Solid-State Lithium Metal Batteries

High Capacity And Superior Cyclic Performances Of All-Solid-State Lithium-Sulfur Batteries Enabled By A High-Conductivity Li10snp2s12 Solid Electrolyte

Sulfide Based Solid Electrolyte for Lithium-Sulfur Batteries

Enabling high-performance all-solid-state lithium batteries with high ionic conductive sulfide-based composite solid electrolyte and ex-situ artificial SEI film

Surface-modified and sulfide electrolyte-infiltrated LiNi0.6Co0.2Mn0.2O2 cathode for all-solid-state lithium batteries

12.6 μm-Thick Asymmetric Composite Electrolyte with Superior Interfacial Stability for Solid-State Lithium-Metal Batteries