Abstract:AbstractDifficult-to-machine materials such as Ni-based superalloy suffer from severe tool wear and poor surface quality; therefore, the cooling mechanism is the key to improving machining performance and reducing the environmental pollution in manufacturing. In the past, plenty of studies verified that the micro-texture on the cutting insert improved the cutting performance under the same cooling condition. The main explanation is that the second generated cracks caused the capillary siphon phenomenon and increased the wettability of the subsurface of the workpiece. In order to investigate the effect of surface wettability differences on the cutting performance of the tool under different micro-textured morphologies, three types of micro-textured CBN tools with pit, linear, and sinusoidal morphologies were fabricated by laser machining technology. Through cutting experiments on Inconel 718 Ni-based superalloy, the cutting force, tool wear, and machined surface roughness of different micro-textured tools were compared and analyzed. The relationship between cutting performance and wettability of different shaped micro-texture was obtained by measuring the contact angle using PT-705B optical angular contact meter. The experimental results show that the presence of surface micro-textures enhances the surface wettability of the tool. It effectively reduces the cutting force and slows down the rake face’s wear and the machined part’s surface roughness. Compared with other morphologies, sinusoidal micro-textured tools show the best cutting performance. Among the four morphologies of micro-textured tools, cutting performance improvement increases with surface wettability. More generally, these primary findings are consistent with research showing that wettability is critical in micro-texture generation for high-performance machining. The conclusion is very much the key component in future attempts to overcome the assumption of the capillary siphon phenomenon on the subsurface of the workpiece.

Microscopic Study on the Mechanism of Tool Bond Wear in Cutting Ni–Fe-Cr-Co–Cu Series Nickel-Base Superalloy

Wear mechanism of nanotwinned cBN tools in nano-cutting Ni-Cr-Fe alloy by molecular dynamics simulation

Analysis of tool wear and cutting characteristics in milling of powder metallurgy nickel-based superalloy by various coatings

Experimental and numerical investigation of Inconel 718 machining with worn tools

Study on phase transformation in cutting Ni-base superalloy based on molecular dynamics method

Effect of Workpiece Atom Diffusion Into CBN Tool on Its Mechanical Properties in Cutting Ni–Fe–Cr Alloy Based on Molecular Dynamics Simulation

Cutting performance of the nanotwinned cBN tool in nano-cutting of Ni-Cr-Fe alloy

Effect of micro-textured morphology with different wettabilities on tool cutting performance

Analysis of Tool Wear in GH4169 Material Milling Process

Variation of Cutting Forces with Different Cutting Parameters and Tool Wear during Turning of 9442-Nickel-Aluminum Bronze

Research on the Cutting Property of Ceramic Tool Cutting Nickel Based Superalloy GH4169

Tool Wear Mechanism and Grinding Performance for Different Cooling-Lubrication Modes in Grinding of Nickel-Based Superalloys

Molecular Dynamics Study on Nano-Friction and Wear Mechanism of Nickel-Based Polycrystalline Superalloy Coating

The effect of chip formation on the cutting force and tool wear in high-speed milling Inconel 718

Study on Phase Transformation in Cutting Nickel-Based Superalloy GH4169 Based on Molecular Dynamics

Analysis of tool wear of TiAlN coated tool, machined surface morphology and chip during titanium alloy milling

Study on nanoscale friction and wear mechanism of nickel-based single crystal superalloy by molecular dynamics simulations

Effects of chip breaker groove and tool nose radius on progressive tool wear and behavior when turning GH3536 nickel-based superalloys

Study on the atomic removal behavior and damage formation mechanism of nano cutting copper-nickel alloy with diamond tool

Tool wear prediction at different cutting edge locations for ball-end cutter in milling of Ni-based superalloy freeform surface part

Wear mechanism of diamond-cutting tool in nano-cutting polycrystalline γ-TiAl alloy based on molecular dynamics simulation