Abstract:Ni-based superalloy is one of the commonly used materials in the aerospace manufacturing field. Tool wear is inevitable and severe in machining Ni-based superalloy. The participation of worn tools in the machining process will lower the surface quality and increase production costs. These unacceptable results can be avoided if the worn tool gets a timely replacement with help of predicting the tool wear. Ball-end cutters are often used in semi-finishing or finishing freeform surface parts. However, the wear distribution along the cutting edge is uneven due to the hemisphere structure of the ball-end cutter and time-varying cutter-workpiece engagement. This phenomenon is hardly considered in existing prediction methods which predict a single value as the overall tool wear. Actually, a failure at any point on the cutting edge will reduce the overall cutting performance of the tool and degrade the surface integrity. Therefore, it is necessary to predict the wear distribution in the ball part. To fill the research gap, this study presents a tool wear prediction method, considering the variety of wear rates and cutting lengths along the cutting edge. First, an improved tool wear rate model considering the effect of the cutting edge location is established. Secondly, the cutting length distribution along the cutting edge is calculated by simulating the machining process. Finally, the wear of the cutting edge at each height is predicted by combining the corresponding wear rate and cutting length. The maximum wear on the tool flank is selected to represent the final tool wear state. The freeform surface milling experiment is carried out to validate this method. Results show that this method can predict the value and the position of the maximum wear on the tool flank under fixed cutting parameters. The prediction error of the maximum wear value is 12.5% when the tool approaches the wear criterion.

Tool wear prediction at different cutting edge locations for ball-end cutter in milling of Ni-based superalloy freeform surface part

Evolutions of multidimensional wear features in ball-end milling of Ni-based superalloy GH4169

Experimental and numerical investigation of Inconel 718 machining with worn tools

Prediction of tool wear during micro-milling Inconel 718 based on long short-term memory network

Cutting tool wear prediction based on the multi-stage Wiener process

Study on Analytical Model of Surface Roughness Prediction in NC Machining

Analysis of Tool Wear in GH4169 Material Milling Process

Model for the prediction of 3D surface topography and surface roughness in micro-milling Inconel 718

Tool Quality Life during Ball End Milling of Titanium Alloy Based on Tool Wear and Surface Roughness Models

Analysis of tool wear and cutting characteristics in milling of powder metallurgy nickel-based superalloy by various coatings

Quantitative Study of High-Frequency Fatigue Hole-Edge Stresses in Nickel-Based Single-Crystal Superalloy

Tool wear monitoring through online measured cutting force and cutting temperature during face milling Inconel 718

Tool wear rate prediction in ultrasonic vibration-assisted milling

Microscopic Study on the Mechanism of Tool Bond Wear in Cutting Ni–Fe-Cr-Co–Cu Series Nickel-Base Superalloy

Prediction model of surface integrity characteristics in ball end milling TC17 titanium alloy

Finite element simulation of cutting process under the worn tool edge geometries

Tool wear estimation and life prognostics in milling: Model extension and generalization

Research on the Milling Tool Wear and Life Prediction by Establishing an Integrated Predictive Model

Experimental investigation of tool wear characteristics and analytical prediction of tool life using a modified tool wear rate model while machining 90 tungsten heavy alloys

Wear Prediction of Tool Based on Modal Decomposition and MCNN-BiLSTM

A continuous oscillating milling strategy based on uniform wear theory for improving the service life of the ball-end cutter