Abstract:High-strength bolts have been widely used in steel bolted connections, and fire-induced high temperatures will affect its basic mechanical properties and fracture behavior, leading to failure of the connection and even collapse of the overall structure. Tensile experiments are conducted on Grade 10.9 high-strength bolts to investigate the effect of stress triaxiality and heating history on their mechanical and fracture properties in the whole process of fire. The true stress-strain curves are obtained, and microscopic fracture mechanism is analyzed by SEM. The SMCS fracture model is calibrated based on test results, and parametric studies are conducted on fracture performance of T-stub connections in fire. The experimental results show that the material properties in the heating-cooling stage depend on the maximum temperature, which is inaccurate and unsafe if being replaced by those in the heating stage. The fracture performance of high-strength bolts is greatly affected by maximum and target temperatures, and the bolt ductility increases with the increase of temperatures, up to 3.5 times the ambient-temperature value. High-strength bolts exhibit ductile fracture characteristics in the whole process of fire, and the SMCS model can effectively predict the fracture behavior of Grade 10.9 high-strength bolts for a stress triaxiality range of 0.3 to 1.2. The ductility factor of T-stub connections is related to its failure mode with a variation range of 0.6 to 1.6. It is necessary to consider the fracture performance of high-strength bolts for determining the bearing capacity of bolted connections in the whole process of fire.

Discussion on Supervision and Inspection Method of High Temperature Bolt of Steam Turbine

FEM-based Multi-field Coupling Stress Analyses of the Cylinder-bolts System in a Gas Turbine Power Plant

Fracture Failure Analysis on Bolt for Power Plant

Some Critical Issues in Creep and Fracture Assessment at High Temperature

Cause Analysis and Improvement Measures for Pipeline Cracking of 9Cr-1Mo Material

Failure Analysis of Ruptured Bolts in Coal Gas Heater

Life prediction for high temperature bolting of ultra-supercritical units

Analysis of High Temperature Flange & Bolt Temperature Variation of the Steam Turbine Cylinder During Start-Up Process Based on In-Service Data

Failure Analysis on Unexpected Fracture of the Hydraulic Expansion Mandrel for Tube to Tubesheet Expanding in the Steam Generator of Nuclear Power Plant

Analysis Of High Temperature Creep On The Nut Connection Components Of A 600mw Supercritical Steam Turbine

Failure analysis on the bolt connecting the head-cover and stay ring in pumped storage unit: Part I-Experimental study

Failure Analysis on Abnormal Bursting of Heat Transfer Tubes in Spiral-Wound Heat Exchanger for Nuclear Power Plant

Research Progress of the Creep Damages and Fractures of High Temperature Equipment and Components

Failture Analysis of Welded Joint on Superheater of a 670t/h Boiler

Analysis of Frequent Tube Burst of High Temperature Reheater in 600 MW Unit

Failure analysis of reheater tubes in a 350 MW supercritical circulating fluidized bed boiler

Failure Analysis on the Bolt Connecting the Head-Cover and Stay Ring in Pumped Storage Unit: Part Ⅰ-Experimental Study

BURST ANALYSIS OF HIGH TEMPERATURE RE-HEATER PIPE OF POWERSTATION

TEMPERATURE FIELD AND THERMAL STRESS FINITE ELEMENT ANALYSIS OF A 50MW STEAM TURBINE'S CYLINDER IN A POWER PLANT

Analysis of the Sealing Performance and Creep Behavior of the Inner Casing of A 1000 Mw Supercritical Steam Turbine under Bolt Relaxation

Fracture behavior of Grade 10.9 high-strength bolts and T-stub connections in fire