Abstract:Nowadays, pump-turbine units have to experience multiple start-stops every day to balance the power production and consumption on the grid. During the transient process of turbine start-up, the hydraulic forces applied to the head-cover would change dramatically and induce high-level stresses on the head-cover bolts. As key components of large hydraulic turbine units, the head-cover bolts are subjected to tens of thousands of tonnes of hydraulic excitation force during operation. Special attention should be paid to the design of the head-cover bolts of large hydraulic pump-turbine units because these units have high water heads and high hydraulic excitation forces. Therefore, the safe design of the head-cover bolts is extremely important to maintain the operational safety of the whole unit. This paper investigates the flow-induced stress characteristics of the head-cover bolts during turbine start-up in a large prototype pump-turbine unit. A complete 3D fluid model and a corresponding 3D structural model, including the head-cover bolts of the pump-turbine unit, were created. The fluid–structure coupling method was used to calculate the structural stresses caused by fluid flow during turbine start-up. The pressure files during turbine start-up calculated by the CFD tool were transferred and mapped to the finite element model of the structural components of the pump-turbine unit. Subsequently, the flow-induced stress characteristics of the head-cover bolts were numerically simulated. The simulation results showed that the hydraulic excitation force on the head-cover bolts increased significantly during turbine start-up, and the displacement and the stress distributions of different head-cover bolts were not uniform. The calculation methods and conclusions in this paper can also be applied to evaluate the flow-induced stress characteristics of head-cover bolts for similar hydraulic pump-turbine units.

Failure Analysis on the Bolt Connecting the Head-Cover and Stay Ring in Pumped Storage Unit: Part Ⅰ-Experimental Study

Failure analysis on the bolt connecting the head-cover and stay ring in pumped storage unit: Part I-Experimental study

Numerical simulation on the dynamic behavior of the bolt connecting the head-cover and stay ring in pumped storage unit

A Simulation Study of Hydraulic Vibration caused by Clearance Flow in a Pump Turbine

Stress Characteristic Analysis of Pump-Turbine Head Cover Bolts During Load Rejection Based on Measurement and Simulation

Study on dynamic stress variation of head cover bolt during transient operation of pump turbine

Pressure pulsation analysis of runner and draft tube of pump turbine under different working conditions

Stress Analysis of Screw Connection of Key Structural Components in Pump Turbine

FEM-based Multi-field Coupling Stress Analyses of the Cylinder-bolts System in a Gas Turbine Power Plant

Pressure pulsation in small opening operating mode of pump turbine’s turbine mode

Flow-Induced Dynamic Behavior of Head-Cover Bolts in a Prototype Pump-Turbine During Load Rejection

Fracture Analysis and Fatigue Strength Calculation of Anchor Bolt Used in Circulating Water Pump in Nuclear Power Plant

Study on Stresses of Head Cover Bolts in a Pump Turbine Based on FSI

Computation of Static Stresses of the Head Cover Bolts in a Pump Turbine

The Influence of Different Operating Conditions on the Support Bracket Stress in Pumped Storage Units

Axial Force Analysis of the Support Bracket of Pumped Storage Unit

Failure Analysis on Premature Fracture of Anchor Bolts in Seawater Booster Pump of Nuclear Power Plant

Research on the Flow-Induced Stress Characteristics of Head-Cover Bolts of a Pump-Turbine During Turbine Start-Up

Stresses and Relative Stiffness of the Head Cover Bolts in a Pump Turbine

Failure analysis and structural fatigue resistance design of multistage centrifugal pump shaft

Experimental and Numerical Studies on Erosion Damage in Damping Holes on the Valve Plate of an Axial Piston Pump