Abstract:Steels are now considered to be a category of new materials, which have progressed year by year to meet the market requirements for high performance. Although it is well known that the performance of steel is dependent upon microstructure, the potential of microstructure evolution is really unknown by people at present due to the steadily developing steel metallurgy. The study is needed to investigate the potential microstructure evolution phenomena in steels and to develop new technology to improve the properties through microstructure control, by which the safety and reliability of steels in service could be eventually improved remarkably. The issues such as steel metallurgy for ultra cleanliness and ultra homogeneity, phase transformation mechanism of meta-stable austenite subject to temperature and load changes, carbon diffusion and partitioning during transformation, multi scale characterization of structures, and microstructure stability subject to temperature and load changes are thought to be the key points to clarify the microstructure evolution at the existing circumferences. As a result, it can be expected that the fundamentals of microstructure control featured by multi-phase, meta-stable and multi-scale (M-3) could be established, and then the technologies to process high performance steels could be developed: the third generation HSLA steels with improved toughness and/or ductility (A(KV(-40 degrees C)) >= 200 J and/or A >= 20% as Rp0.2 in 800-1,000 MPa), the third generation advanced high strength steels (Rm x A >= 30 GPa% as Rm from 1,000 to 1,500 MPa) for automobiles with improved ductility and low cost, and the third generation heat resistant martensitic steels with improved creep strength (sigma(650) (10,000) >= 90 MPa). It can be expected that the new technology developed will improve the safety and reliability of steel products in service remarkably for infrastructures, automobiles and fossil power station in the future.

Study on The Process Control of DCO3 Low Carbon Aluminum Killed Steel

The Research on Al-Si Coating for Hot Forming Steel

A Study on DC01 Steel Strip to Improve the Elongation Properties and Batch Annealing Process

Experimental study on different refining processesof low carbon aluminum killed steel

Method for producing medium and low carbon aluminum killed steel

Study on the technology of controlling nitrogen content in molten steel

Control of oxide inclusion for low carbon and low silicon steel

Effect of Alloying Elements and Processing Parameters on Microstructure and Properties of 1XXX Aluminium Alloys

Microstructure and Performance Control Technology of the 3rd Generation Auto Sheet Steels

Effect of Controlled Rolling on the Strength and Toughness of Low‐Alloy Martensitic Steel

The significance of hot rolled microstructure controlled by fine-tuning Al content to texture evolution and magnetic properties of low silicon non-oriented electrical steels

On the Performance Improvement of Steels through M<sup>3</sup>Structure Control

Research status and prospect of direct strip casting manufactured low-carbon microalloyed steel

On the Performance Improvement of Steels through M<Superscript>3</Superscript> Structure Control

Optimizing RH refining process to maximize cleanliness of low-carbon low-silicon Al killed steel

Effect of Treatment with Microarc Oxidation Technology on Tribological Properties of Nonvalve Metal Low-Carbon Steel

Kinetic study of control of alloy elements during electroslag remelting of Incoloy825

Control of Upstream Austenite Grain Coarsening during the Thin-Slab Cast Direct-Rolling (TSCDR) Process

Influence of Al addition on the grain boundary oxidation of Ultra High Strength Steels during hot coiling

Banded structure control of low carbon microalloyed steel based on oxide metallurgy

Properties and microstructure evolution of unfired Al–Si incorporated Al2O3–C slide plate materials with trace nano-Al2O3 particles