Abstract:Concrete cracking is a significant issue in the global construction industry, and the restraint stress of concrete is a crucial contributing factor to early concrete cracking. The addition of magnesium oxide additive (MEA) to concrete is a method to enhance its crack resistance. In this paper, concrete specimens with four different contents of MEA were tested with a temperature stress testing machine. The deformation characteristics and mechanical properties of concrete with varying contents of MEA were investigated using both free deformation tests and fully constrained deformation tests. The prediction model for the early restrained stress of concrete was developed by integrating the stress relaxation phenomenon of concrete with models for autogenous shrinkage, temperature deformation, and elastic modulus. According to the results, (1) the thermal expansion coefficient exhibits a pattern of initially increasing and subsequently decreasing with the increasing ratio of MEA; (2) the addition of 3% and 8% MEA can offset 23% and 35.1% of the concrete's self-shrinkage, respectively. Nevertheless, when the added MEA content is 5%, the self-shrinkage of concrete increases by 6%; (3) the addition of 3–8% MEA can result in a 0.5–1.67 times increase in the maximum expansion stress of concrete, as well as a 0.5–0.95 times increase in cracking stress; (4) as the MEA content continues to increase, the stress relaxation level of concrete also increases. In comparison to concrete mixed without MEA, the maximum increase in the stress relaxation level of concrete is 65.5%, thereby enhancing the concrete's anti-cracking ability. However, when the MEA dosage reaches a certain threshold, the stress relaxation enhancement brought about by the addition of MEA will no longer be significant; (5) when compared to the experimental data, the established model of early-age constraint stress accurately predicts the tensile constraint stress of concrete.

Experimental Study on Thermal Stress of Concrete with Different Expansive Minerals Using a Temperature Stress Testing Machine

Experimental study on dynamic behavior of concrete at elevated temperatures

The Early-Age Drying Shrinkage of Cement-Based Materials with the Same Workability after Temperature Compensation

Finite element analysis of temperature effect and crack-control measures for ultra-long concrete structures

Effect of spatial variability of concrete materials on the uncertain thermodynamic properties of shaft lining structure

Assessment and mitigation of early-age cracking for on-site concrete structures by a combined scheme using Temperature Stress Testing Machine (TSTM) and long-span restraining frame

Experimental Investigation of the Static Expansion Tensile Behavior of Concrete after Exposure to Elevated Temperatures

Experimental Study on Early-Age Crack of Mass Concrete under the Controlled Temperature History

Effect of Reinforcement on Early-Age Concrete Temperature Stress: Preliminary Experimental Investigation and Analytical Simulation

Research On The Crack Risk Of Early-Age Concrete Under The Temperature Stress Test Machine

Temperature-Dependent Coefficient of Thermal Expansion of Concrete in Freezing Process

Stress Analysis for Concrete Materials under Multiple Freeze-Thaw Cycles

Experimental Study on Early-Age Crack of RC Using TSTM

Effect of Thermal Parameters on Hydration Heat Temperature and Thermal Stress of Mass Concrete

Restrained Cracking Failure Behavior of Concrete Due to Temperature and Shrinkage

Research on the Early-Age Cracking of Concrete Added with Magnesium Oxide under a Temperature Stress Test Machine

Effect of Working Temperature Conditions on the Autogenous Deformation of High-Performance Concrete Mixed with MgO Expansive Agent

Experimental Study of Thermal-Hydraulic-Mechanical Coupling Behavior of High-Performance Concrete

Effect of Different Expansive Agents on the Deformation Properties of Core Concrete in a Steel Tube with a Harsh Temperature History

Investigation of Crack Control of Underground Concrete Structure with Expansive Additives

Temperature Stress Analysis of an Overlength Basement Concrete Structure