Abstract:Over the past 20 years, as the depth and diameter of shaft lines increased in China, the cracking and water leakage of the inner walls of frozen shafts have become increasingly severe, resulting in significant safety threats and economic losses. Understanding the stress variation patterns of cast-in-place inner walls under the combined effects of temperature and constraint during construction is a prerequisite for evaluating the crack resistance performance of inner walls and preventing water leakage in frozen shafts. The temperature stress testing machine is an important instrument for studying the early-age crack resistance performance of concrete materials under the combined effects of temperature and constraint. However, existing testing machines have shortcomings in terms of applicable specimen cross-sectional shapes, temperature control methods for concrete structures, and axial loading capacity. In this paper, a novel temperature stress testing machine suitable for the inner wall structure shape, capable of simulating the hydration heat of the inner walls, was developed. Then, a reduced-scale model of the inner wall according to similarity criteria was manufactured indoors. Finally, preliminary investigations of the temperature, strain, and stress variations of the inner wall under 100% end constraint conditions were conducted by simulating the actual hydration heating and cooling process of the inner walls. Results show that the hydration heating and cooling process of the inner wall can be accurately simulated. After approximately 69 h of concrete casting, the accumulated relative displacement and strain of the end-constrained inner wall model were −244.2 mm and 187.8 με, respectively. The end constraint force of the model increased to a maximum value of 1.7 MPa and then rapidly unloaded, causing the model concrete to crack in tension. The temperature stress testing method presented in this paper provides a reference for scientifically formulating technical approaches to prevent cracking in cast-in-place concrete inner walls.

Effect of spatial variability of concrete materials on the uncertain thermodynamic properties of shaft lining structure

Stochastic investigation on three-dimensional diffusion of chloride ions in concrete

Probabilistic Assessment of Tunnel Convergence Considering Spatial Variability in Rock Mass Properties Using Interpolated Autocorrelation and Response Surface Method

Temperature-Dependent Coefficient of Thermal Expansion of Concrete in Freezing Process

Effects of material parameters' fluctuation in calculating the thermal stress of concrete

Effect of uncertain hydrothermal properties and freezing temperature on the thermal process of frozen soil around a single freezing pipe

Evaluation of the scale of fluctuation based on variance reduction method

Effect of Spatial Variability on Buried Footings

Study on the Thermal Variation of Early-Age Rock-Filled Concrete - Part Ii Mesoscopic Thermal Field Reconstruction and Parametrical Studies

Multiscale Thermoelastic Analysis of the Thermal Expansion Coefficient and of Microscopic Thermal Stresses of Mature Concrete

Autogenous deformation and coefficient of thermal expansion of early-age concrete: Initial outcomes of a study using a newly-developed Temperature Stress Testing Machine

Experimental Study of Thermal-Hydraulic-Mechanical Coupling Behavior of High-Performance Concrete

Experimental Study on Thermal Stress of Concrete with Different Expansive Minerals Using a Temperature Stress Testing Machine

Development and Preliminary Application of Temperature Stress Test Machine for Cast-in-Place Inner Shaft Lining

Thermal deformation and stress of alkali-activated slag concrete under semi-adiabatic condition: Experiments and simulations

Thermal Analysis of Mass Concrete Embedded with Double-Layer Staggered Heterogeneous Cooling Water Pipes

Effect of thermal fatigue on mechanical properties and microstructure of concrete in constant ambient humidity

Towards Better Characterizing Thermal Conductivity of Cement-Based Materials: the Effects of Interfacial Thermal Resistance and Inclusion Size

Thermal–physical properties of selected geomaterials: coal, sandstone and concrete based on basic series and parallel models

Effects of Temperature Variations on Safety of Reinforced Concrete Structures During Construction

Scale dependency of anisotropic thermal conductivity of heterogeneous geomaterials