Abstract:Over the past 20 years, as the depth and diameter of shaft lines increased in China, the cracking and water leakage of the inner walls of frozen shafts have become increasingly severe, resulting in significant safety threats and economic losses. Understanding the stress variation patterns of cast-in-place inner walls under the combined effects of temperature and constraint during construction is a prerequisite for evaluating the crack resistance performance of inner walls and preventing water leakage in frozen shafts. The temperature stress testing machine is an important instrument for studying the early-age crack resistance performance of concrete materials under the combined effects of temperature and constraint. However, existing testing machines have shortcomings in terms of applicable specimen cross-sectional shapes, temperature control methods for concrete structures, and axial loading capacity. In this paper, a novel temperature stress testing machine suitable for the inner wall structure shape, capable of simulating the hydration heat of the inner walls, was developed. Then, a reduced-scale model of the inner wall according to similarity criteria was manufactured indoors. Finally, preliminary investigations of the temperature, strain, and stress variations of the inner wall under 100% end constraint conditions were conducted by simulating the actual hydration heating and cooling process of the inner walls. Results show that the hydration heating and cooling process of the inner wall can be accurately simulated. After approximately 69 h of concrete casting, the accumulated relative displacement and strain of the end-constrained inner wall model were −244.2 mm and 187.8 με, respectively. The end constraint force of the model increased to a maximum value of 1.7 MPa and then rapidly unloaded, causing the model concrete to crack in tension. The temperature stress testing method presented in this paper provides a reference for scientifically formulating technical approaches to prevent cracking in cast-in-place concrete inner walls.

Research On The Crack Risk Of Early-Age Concrete Under The Temperature Stress Test Machine

Finite element analysis of temperature effect and crack-control measures for ultra-long concrete structures

Experimental Study on Early-Age Crack of Mass Concrete under the Controlled Temperature History

Experimental Study on Early-Age Crack of RC Using TSTM

Development of Internal Moisture Transfer and Cumulative Residual Strain in Concrete under Freeze-Thaw Cycles

Restrained Cracking Failure Behavior of Concrete Due to Temperature and Shrinkage

Early Age Properties and Cracking Control of Concrete

Self-Developed Testing System for Determining the Temperature Behavior of Concrete.

Assessment and mitigation of early-age cracking for on-site concrete structures by a combined scheme using Temperature Stress Testing Machine (TSTM) and long-span restraining frame

Effect of Reinforcement on Early-Age Concrete Temperature Stress: Preliminary Experimental Investigation and Analytical Simulation

EXPERIMENTAL AND NUMERICAL ANALYSIS OF EARLY-AGE STRESS IN CONCRETE DIAPHRAGM WALL OF UNDERGROUND STRUCTURES

Testing System for Mechanical Behaviors Analysis and Cracking Resistance of Concrete at Early Age

Experimental Study on Thermal Stress of Concrete with Different Expansive Minerals Using a Temperature Stress Testing Machine

Development and Preliminary Application of Temperature Stress Test Machine for Cast-in-Place Inner Shaft Lining

Assessing the zero-stress temperature in high performance concrete at early age

Double Feedback Control Method for Determining Early-Age Restrained Creep of Concrete Using a Temperature Stress Testing Machine

Combining Thermal Loading System with Acoustic Emission Technology to Acquire the Complete Stress-Deformation Response of Plain Concrete in Direct Tension

Experimental Study on Some Factors Affecting Fracture Property of Concrete

Application of Equivalent Age Method to Concrete Thermal Cracking Control at Early Ages

Research on Crack-Resisting Construction Design Method of Concrete Small Cavity Block Building Based on Temperature Effect

YOUNG CONCRETE THERMAL CRACKING CONTROL BASED ON EQUIVALENT AGE METHOD