Abstract:A novel theoretical model capable of quantifying the stress causing transient thermal strain (TTS) in heated concrete has been proposed in this work. It can be used in finite element models or as a direct design equation to help structural designers in assessing the stress developed during heating of concrete members caused by combined actions of mechanical loads, heating fluxes and end restraints. The model classifies heated concrete problems into three categories; concrete members heated to a certain temperature then loaded; concrete members stressed to a certain level and then heated to a certain temperature under load; concrete members heated with fully restrained ends with or without external loading. The new TTS equation has been incorporated in a novel coupled thermo-mechanical finite element model in the framework of ABAQUS. Material models capable of capturing the constitutive behaviour and specifically the degradation of material properties experienced by concrete exposed to elevated temperatures, have been selected from the literature and have been adapted to include TTS and, where absent, temperature dependence. The FE model, along with the developed stress equation, has been validated against experimental results in which samples were tested under various loading configurations and boundary conditions. It has been shown to successfully reproduce the results for all of the studied cases. Furthermore, in exploring these scenarios a number of observations were made. Firstly, it was found that the stress developed under restraint is lower than under applied preload, but that stress relaxation in part due to TTS is higher in preloaded samples. Secondly, the limit of elastic behaviour appears to be reduced in samples subject to free thermal expansion compared to those under restraint. Finally, while free thermal expansion is critical to the overall stress-strain response there is evidence that it varies with the applied stress and significantly increases at high temperatures.

Assessing the zero-stress temperature in high performance concrete at early age

Finite element analysis of temperature effect and crack-control measures for ultra-long concrete structures

Development of Internal Moisture Transfer and Cumulative Residual Strain in Concrete under Freeze-Thaw Cycles

Experimental study on dynamic behavior of concrete at elevated temperatures

Research On The Crack Risk Of Early-Age Concrete Under The Temperature Stress Test Machine

Autogenous deformation and coefficient of thermal expansion of early-age concrete: Initial outcomes of a study using a newly-developed Temperature Stress Testing Machine

Experimental Study on Early-Age Crack of Mass Concrete under the Controlled Temperature History

Early Age Properties and Cracking Control of Concrete

Research of Zero Stress Temperature Gradient in Cement Concrete Pavement

A Generalised Model for Direct Prediction of Stresses in Concrete at High Temperatures

Stress Prediction in Very Early-Age Concrete Subject to Restraint under Varying Temperature Histories

Stress Analysis for Concrete Materials under Multiple Freeze-Thaw Cycles

Self-Developed Testing System for Determining the Temperature Behavior of Concrete.

Modeling and Mesoscale Simulation of Ice-Strengthened Mechanical Properties of Concrete at Low Temperatures

Effects a simplified numerical model for temperature profiles of early age concrete

A concrete quality control in the construction process

Experimental Investigation of the Deformational Behavior of the Interfacial Transition Zone (itz) in Concrete During Freezing and Thawing Cycles

Testing System for Mechanical Behaviors Analysis and Cracking Resistance of Concrete at Early Age

Experimental Study on Early-Age Crack of RC Using TSTM

Effect of Reinforcement on Early-Age Concrete Temperature Stress: Preliminary Experimental Investigation and Analytical Simulation

Dynamic tensile properties of thermally treated concrete specimens subjected to varied heating rates: an investigation using the digital image correlation method