Abstract:A novel desalination device named rotational supercavitating evaporator (RSCE) has been proposed and designed by utilizing supercavitation effect. With special focus on the spatiotemporal evolution of rotational natural cavitation, the hydrodynamic characteristics of cavitating flows in RSCE under different rotational speeds are studied by the visualization experiments and three-dimensional steady numerical simulations. The results of the visualization experiments show that with increasing rotational speed, the cavity morphology develops from several transient isolated bubbles moving with the blades, to blurred partial cavity, and finally to transparent supercavity with nearly constant size. Numerical simulation can predict the development of the cavity morphology in the experiment qualitatively and quantitatively. Vapor phase structures are shed at the tail of the cavity due to the reentrant jet, which are in the forms of single smaller bubbles and U-shaped vapor phase structures under lower rotational speeds and of cavitation clouds and cavitating filaments containing strings of bubbles under higher rotational speeds. Vortex structure is captured based on Q-criterion and encloses the cavity in the radial direction, wherein the periphery of the cavity is enclosed by a single tip vortex tube which can explain the generation of drifting stripe-shaped cavity under higher rotational speeds due to tip vortex, and the cavity tail is enclosed by two vortex tubes split from the single tip vortex tube. A power-law empirical formula for the dimensionless supercavity length versus the cavitation number considering the effect of rotation is obtained by fitting the experimental data on fully developed supercavitation.

Experimental Study of Vapor Supercavitation Suppression of Capillary Outlet Jet Noise

Experimental Research on Aerated Supercavitation Suppression of Capillary Outlet Throttling Noise

Numerical and experimental investigation of cavitation characteristics of the electronic expansion valves

A Comparative Study on Regulation Methods for Transcritical CO2 Ejector Expansion Refrigeration System.

Cavitation characteristics and suppression research of refrigerant in capillary tube

Numerical Analysis of Noise Radiation from Refrigerator Compressor Shell

Theoretical investigation on an ejector–expansion refrigeration cycle using zeotropic mixture R290/R600a for applications in domestic refrigerator/freezers

The new refrigeration system with vortex tube and ejector

Experimental Investigations on A R134a Ejector Applied in A Refrigeration System

Investigation on the noise induced by gas–liquid two-phase flow in a capillary tube

Experimental Study on an Thermosyphon Loop with Bubble Pump Effect

Experimental study on vaporous cavitation of R134a in micron clearance

Flow-induced Noise Mechanism and Optimization Design of Electronic Expansion Valve

Experimental and numerical study on characteristics of super-linear mass flow rate and asymmetric cavitation in novel rotary-baffle curved-channel electronic expansion valve for refrigerator

Experimental Research on the Performance of a Refrigerant Generating Bubble Pump Based on a Diffusion Generation Process with H2O HCOOK-R134a

Spatiotemporal Evolution of Rotational Natural Cavitation in Rotational Supercavitating Evaporator for Desalination

Research on Noise-Induced Characteristics of Unsteady Cavitation of a Jet Pump

Simulation Study on Noise Reduction Effect of Porous Material on Electronic Expansion Valve

Experimental investigation on interface characteristics and heat transfer during bubble condensation in narrow rectangular channel

Experimental studies of droplet nucleate boiling characteristics on micro-cavities surfaces with different wettability

Effectiveness of actively adjusting vapour-liquid in the evaporator for heat transfer enhancement