Abstract:The visualized cavitation experimental apparatus is designed and constructed. The cavitation evolution process is recorded by high‐speed photography. The evaporation and condensation coefficients are modified based on experiments. The cavitation damage region is predicted by the gas‐phase condensation rate.For the phenomenon of widespread and serious cavitation damage in the throttling section of pressure reducing valve under high temperature and high pressure in the chemical technology process of petroleum and coal, according to actual coordination structure widely applied between the valve core and valve seat, the cavitation throttling section with symmetrical contraction and expansion was made, and the visualized cavitation water tunnel experimental apparatus was designed and constructed. The cavitation evolution process with time under different cavitation numbers σ was recorded by the high‐speed photography, the variation law of cavitation damage length and area with time was investigated by using aluminum film as cavitation damage carrier. Based on the experimental cavitation characteristic length L*, the evaporation coefficient Fv, and condensation coefficient Fc in the Zwart–Gerber–Belamri cavitation numerical model were modified, and the cavitation damage region was predicted by the gas phase condensation rate of numerical simulation. The results show that with the decrease of cavitation number, the characteristic length of cavitation strip increases; the cavitation characteristic length fluctuates greatly at σ = 1.22, and there are cavitation cloud periodic formation, shedding, collapse, and disappearance at the tail of the cavitation strip on the upper valve seat; the cavitation damage length of the upper and lower valve seat remains unchanged with time, and the cavitation damage area increases approximately linearly with time; the initial position and length of cavitation damage predicted by the gas phase condensation rate are basically consistent with the experimental results, which verifies the accuracy of the modified numerical simulation.

Cavitation characteristics and suppression research of refrigerant in capillary tube

Numerical Simulation and Experimental Study of Capillary Tubes

Experimental Research on Aerated Supercavitation Suppression of Capillary Outlet Throttling Noise

Experimental Study on Cavitation Resistive Property of Water Hydraulic Throttle Orifices

A Comparative Study on Regulation Methods for Transcritical CO2 Ejector Expansion Refrigeration System.

Experimental and Numerical Study on Cavitation Flow Characteristics of Refrigerants with Different Thermophysical Properties in Confined Micro-Clearance

Experimental Study of Vapor Supercavitation Suppression of Capillary Outlet Jet Noise

The Hydraulic Cavitation Affected by Nanoparticles in Nanofluids

A Thermodynamic Cavitation Model Applicable to High Temperature Flow

Experimental Study on Throttle Opening in Auto-cascade Refrigeration System

Numerical and experimental investigation of cavitation characteristics of the electronic expansion valves

Simulation of Throttling Effect on Cavitation for Nozzle Internal Flow

Numerical Analysis Of Airfoil Naca0015 And Centrifugal Pump'S Cavitation Characteristic Based On The Thermodynamic Effects

A new cavitation model based on evaporation and condensation theory

THE IMPROVEMENT AND NUMERICAL APPLICATIONS OF A THERMODYNAMIC CAVITATION MODEL

Cavitating flows in microchannel with rough wall using a modified microscale cavitation model

Cavitation Simulation with Consideration of the Viscous Effect at Large Liquid Temperature Variation

Study of the Flow in a Cryogenic Pump under Different Cavitation Inducements by Considering the Thermodynamic Effect

Experiment and numerical simulation investigation on cavitation evolution and damage in the throttling section of pressure reducing valve

Thermodynamic effects at Venturi cavitation in different liquids

New approach of suppressing cavitation in water hydraulic components