Abstract:Micro-structured surfaces have a significant impact on the flow boiling process in microchannels, but few numerical studies have been carried out due to their complex nature. In this study, the numerical investigation of flow boiling on micro-fin, micro-cavity, and smooth surfaces in a microchannel was conducted, with water serving as the working fluid. The volume-of-fluid (VOF) method, the phase change model, and solid-fluid thermal coupling were adopted in an OpenFOAM solver to perform the computation. The enhancing effects and detailed mechanisms of the micro-fin and micro-cavity surfaces on the heat transfer process are discussed, and the influences of wettability on these surfaces are investigated. With a contact angle of 60°, the heat transfer coefficient of the micro-fin surface was 61.92% larger, and the overall thermal resistance was 36.64% lower than that of a smooth surface, respectively. The confined bubbles on the micro-fin surface had a much smaller dryout area on the heated wall due to the capillary wetting effect. Moreover, the micro-fin surface with the rising nucleate bubbles can induce vortexes, which strengthens the convective heat transfer. As for the micro-cavity surface, it had a moderate heat transfer enhancement with a 17.16% larger heat transfer coefficient and a 13.55% lower thermal resistance when compared with a smooth surface. When the wettability of a heating surface is enhanced, the dryout area is minimized. Thus, the heat transfer performance of the smooth and micro-cavity surfaces is enhanced. The enhancement resulting from modified surface wettability has less of an effect on the micro-fin surface because the micro-fin array serves a similar function to minimize the dryout area.

Cavitating flows in microchannel with rough wall using a modified microscale cavitation model

Numerical simulation of flow and heat transfer in journal bearing lubrication

The Hydraulic Cavitation Affected by Nanoparticles in Nanofluids

Cavitating Flow Through A Micro-Orifice

A Transport Equation Model for Simulating Cavitation Flows in Miniature Machines

A Thermodynamic Cavitation Model Applicable to High Temperature Flow

Experimental and numerical studies of liquid-liquid two-phase flows in microchannel with sudden expansion/contraction cavities

Rarefied Gas Flow in Rough Microchannels by Molecular Dynamics Simulation

A new cavitation model based on evaporation and condensation theory

Enhancement of Flow Boiling Heat Transfer in Microchannel Using Micro-Fin and Micro-Cavity Surfaces

Cavitation Simulation with Consideration of the Viscous Effect at Large Liquid Temperature Variation

Modeling Cavitation Flow of Cryogenic Fluids with Thermodynamic Phase-Change Theory

1-D Modelling and 3-D Simulation of Confined Bubble Formation and Pressure Fluctuations During Flow Boiling in a Microchannel with a Rectangular Cross-Section of High Aspect Ratio

The Numerical Simulation of Cavitation Phenomenon in a Venturi Tube

Confined Bubble Growth During Flow Boiling in a Mini/micro-Channel of Rectangular Cross-Section Part I: Experiments and 1-D Modelling

Cavitating Flow Simulation for High Temperature Water Based on Thermodynamic Effects

Lattice Boltzmann mesoscopic modeling of flow boiling heat transfer processes in a microchannel

A Cavitation Model Considering Thermodynamic and Viscosity Effects

Simulation Of Single Bubble Evaporation In A Microchannel In Zero Gravity With Thermocapillary Effect

THE IMPROVEMENT AND NUMERICAL APPLICATIONS OF A THERMODYNAMIC CAVITATION MODEL

Study of the Flow in a Cryogenic Pump under Different Cavitation Inducements by Considering the Thermodynamic Effect