Abstract:Despite the wealth of literature on the friction and wear behaviour of ceramics, their wear mechanisms are far from well understood. The need to develop a precise understanding of the wear mechanisms is imperative for the development of better wear-resistant ceramics. Particularly in alumina ceramics, grain coarsening has been found to improve the crack growth resistance characteristics. However, if the same would be beneficial for wear resistant applications has not been systematically investigated. To evaluate if there exists a strong grain size effect on abrasive wear mechanisms in ceramics, a series of tests were conducted under severe sliding contact conditions in an alumina ceramic. Unlubricated sliding wear tests were performed on alumina of three different grain sizes, 0.7, 5 and 25 μm, using a blunt conical diamond indenter of about 100-μm tip radius as the slider at room temperature under normal loads of 8–40 N and sliding distances up to 120 mm. The abrasive wear behaviour was characterised by measuring the wear volume and wear rate as a function of normal load and sliding distance. In addition, the friction behaviour was also studied simultaneously as a function of these two variables. The wear damage mechanisms were examined using both optical and electron microscopy as well as energy dispersive X-ray spectroscopy. For a given grain size and sliding distance, the width and depth of the worn track (hence wear volume) and the frictional force all increased with normal load. These observations were more markedly displayed in the coarse-grained than in the fine-grained alumina. In the 0.7-μm fine-grained alumina, the wear process appeared to be mainly controlled by plastic deformation especially at low loads (e.g. < 10 N). At higher loads, however, both plastic deformation and grain boundary fracture processes seemed to be involved. In the 5-μm and 25-μm coarse-grained aluminas, the predominant material removal process was controlled by both intergranular and transgranular fractures.

Wear transitions and tribochemical reactions in ceramics

Wear Behaviour and Microstructural Changes of SiCw-Al Composite under Unlubricated Sliding Friction

Wear performance of alumina-based ceramics - a review of the influence of microstructure on erosive wear

Quantitative wear maps as a visualization of wear mechanism transitions in ceramic materials

Friction and wear of titanium alloys sliding against metal, polymer, and ceramic counterfaces

Characterisation Of Tribological Behaviour Of Silicon And Ceramic Coatings Under Repeated Sliding At Micro-Scale

Erosive Wear Performance and Mechanism of Engineering Ceramic Materials

Tribological Behavior of Various Plasma-Sprayed Ceramic Coatings

Complex Behavior of Nano-Scale Tribo-Ceramic Films in Adaptive PVD Coatings under Extreme Tribological Conditions

Role of composition and microstructure in the abrasive wear of high-alumina ceramics

Grain size effect on abrasive wear mechanisms in alumina ceramics

Tribological Behavior of Liquid Phase Sintered SiC Ceramics Under Dry Condition

Ti6Al4V interacting with Al 2 O 3 under Ambient and Vacuum Conditions: Effect of Plastic Deformation and Tribo-Chemical Reactions on Wear Mechanisms

Wear Behaviour of a Plasma-Sprayed Al2O3-13%TiO2 Ceramic Coating/Steel Couple Under High Constant and Variable Loads

The Relationship between Cyclic Multi-Scale Self-Organized Processes and Wear-Induced Surface Phenomena under Severe Tribological Conditions Associated with Buildup Edge Formation

Temperature-induced wear transition in ceramic-metal composites

Excellent Tribological Properties and Unique Wear-Resistance Mechanism of Binderless Tungsten Carbide Prepared Via Two-Step Oscillatory Pressure Sintering

In-situ friction and wear study of SiCα/SiCβ and Al2O3-TiC-Co composite ceramics

Friction–wear behavior and tribochemical reactions of different ceramics in HFC-134a gas

Latest progress on tribological properties of industrial materials

Role of Interfacial Bonding in Tribochemical Wear