Abstract:Erosion wear regulation with different erosion wear particle's hardness and diameter under different erosion angel (0 degrees, 30 degrees, 45 degrees, 60 degrees and 90 degrees) for alpha-Al2O3 structure ceramics have been systematically studied by liquid-solid dual phase erosion wear test machine with rotation disk through comparing with Cr15Mo3 high chromium cast iron for pumps in industry, and the micro failure mechanism have been analyzed for the experimental materials. The experimental results have been concluded as following: (1) The anti erosion wear property for alpha-Al2O3 ceramics is better than that of Cr15Mo3 high chromium cast iron with same erosion wear particle's hardness and diameter under same erosion angel. (2) The erosion wear lost volume for the experimental materials are increases as the particle hardness or diameter increase with biggest lose for Cr15Mo3 high chromium cast iron. (3) The effect of erosion angel on the erosion wear volume lose features as N-shaped curve with the biggest volume lose at 45 degrees erosion angle while biggest erosion wear volume at 90 degrees angle, which indicates that it should avoid 45 degrees or 90 degrees erosion angle during materials designing. (4) The failure form of materials surface is cutting wear to cutting wear and impact fatigue and to impact fatigue for Cr15Mo3 high chromium cast iron when the erosion angle increasing, but the failure form of alpha-Al2O3 ceramics mainly is crack increasing.

Erosive Wear Performance and Mechanism of Engineering Ceramic Materials

Slurry Erosive Wear Characteristics of Engineering Ceramics for Hydraulic Machinery

The relation of mechanical properties and resistance erosion-wear of structure ceramic

Study on Erosion Resistance of Structural Ceramics

Study on the erosive wear behavior of Al2O3 ceramics

Erosion-Wear Property of α-Al2O3 Structure Ceramics with Different Experiment Parameters

Wear Behaviour and Microstructural Changes of SiCw-Al Composite under Unlubricated Sliding Friction

Erosion Wear Characteristics and Mechanism of Si<sub>3</sub>N<sub>4</sub> Ceramics: Effect of Impact Angle

Erosion wear characteristics and mechanism of Si3N4 ceramics: Effect of impact angle

Wear performance of alumina-based ceramics - a review of the influence of microstructure on erosive wear

Effect of Different Abrasive Particle Hardness on the Erosion Resistant Performance of α-Al<sub>2</sub>O<sub>3</sub> Ceramics

Effect of Different Abrasive Particle Hardness on the Erosion Resistant Performance of Α-Al<sub>2</sub>o<sub>3</sub> Ceramics

Effect of Abrasive Particle Size on Anti-Abrasion Performance of Si3N4 Ceramics

Interfacial characterization and erosive wear performance of zirconia toughened alumina ceramics particles reinforced high chromium white cast irons composites

Effect of different abrasive particle hardness on the erosion resistant performance of α-Al2O3 ceramics

Abrasive wear behavior of Sialon ceramic

Effect of different abrasive particle hardness on the erosion resistant performance of alpha-Al2O3 ceramics

Effect Of Impact Angle On The Resistant-Erosion Performance Of Zta Ceramics

Study on Erosive Wear and Novel Wear-Resistant Materials for Centrifugal Slurry Pumps

WEAR RESISTANCE OF CERAMIC MICROBEADS