Abstract:Corrosion-induced cracking is the most widely encountered and studied long-term deterioration process in reinforced concrete. Naturally occurring corrosion rates are so low that rust accumulates often over tens of years near the surface of the reinforcement bars before sufficient pressure in the surrounding concrete is generated to induce cracking in the concrete cover. To speed up the process in laboratory tests, corrosion setups with impressed currents have been developed in which the corrosion rate is controlled to be so high that cracking of the concrete cover occurs within a few days. Extrapolating the results of these accelerated tests to those of naturally occurring corrosion requires an understanding of the influence of long-term creep deformations of concrete on the corrosion-induced cracking process. In mathematical models in the literature, creep deformations are often ignored for accelerated but considered for natural corrosion rates in the form of an effective modulus. In this work, three numerical models of increasing complexity are proposed with the aim to investigate the effect of creep on corrosion-induced cracking. The simplest approach is based on an uncracked axis-symmetric thick-walled cylinder combined with a plastic limit on the radial pressure-induced by the accumulation of rust. The model with intermediate complexity comprises a thick-walled cylinder model divided into an inner cracked and an outer uncracked layer. The most comprehensive model consists of a thick-walled cylinder discretised by a three-dimensional lattice approach. Basic creep is predicted in all three approaches by means of the B3 model developed by Bažant and co-workers. Time dependence of strength of concrete is modelled using fib Model Code expressions. It is shown that for the comprehensive lattice model, creep has limited influence on critical corrosion penetration, which indicates that the dependence of the critical corrosion penetration on corrosion rate must have other sources.

On Corrosion-Induced Creep and the Shedding of Oxide Pest From Metal Plates

Effect Of Corroded Surface Morphology On Ultra-Low Cycle Fatigue Of Steel Bridge Piers

Molecular Dynamics Simulation of Reinforcing Steel Corrosion when Subjected to Both Chloride Attack and Mechanical Loading

Crossover of interface growth dynamics during corrosion and passivation

Dynamic Simulation Method for Probability Evolution of Reinforcement Steel Corrosion

Residual Stress Analysis in the Oxide Scale/metal Substrate System Due to Oxidation Growth Strain and Creep Deformation

Simulation Investigation on Environment-Induced Pitting Corrosion on the Metal Surface

Inverse Crevice Corrosion of Carbon Steel: Effect of Solution Volume to Surface Area

The development of creep damage constitutive equations for high Cr steel

Oxidation Stress Evolution and Relaxation of Oxide Film/Metal Substrate System

A Creep Constitutive Model, Based on Deformation Mechanisms and Its Application to Creep Crack Growth

Effect of creep on corrosion-induced cracking

Flow-Induced Corrosion Simulation on a Plate by Finite Element Methods

A phase field formulation for dissolution-driven stress corrosion cracking

Analysis of the Creep Mechanism of Low-Alloy Steel in Terms of Plastic Deformation

Synergy of stress and corrosion in a 12Cr ferritic/martensitic steel exposed to static liquid lead-bismuth eutectic at 550°C

Probabilistic constitutive model for corroded structural steel with stochastic pits under monotonic tension

Microstructural evolutions and life evaluation of non-proportional creep-fatigue considering loading path and holding position effects

A partitioned computational framework for damage evolution in stress corrosion cracking utilizing phase‐field

Creep Effect on Time to Corrosion-Induced Cracking of Concrete Cover

Surface Evolution At Nanoscale During Oxidation: A Competing Mechanism Between Local Curvature Effect And Stress Effect