Abstract:Corrosion-induced cracking is the most widely encountered and studied long-term deterioration process in reinforced concrete. Naturally occurring corrosion rates are so low that rust accumulates often over tens of years near the surface of the reinforcement bars before sufficient pressure in the surrounding concrete is generated to induce cracking in the concrete cover. To speed up the process in laboratory tests, corrosion setups with impressed currents have been developed in which the corrosion rate is controlled to be so high that cracking of the concrete cover occurs within a few days. Extrapolating the results of these accelerated tests to those of naturally occurring corrosion requires an understanding of the influence of long-term creep deformations of concrete on the corrosion-induced cracking process. In mathematical models in the literature, creep deformations are often ignored for accelerated but considered for natural corrosion rates in the form of an effective modulus. In this work, three numerical models of increasing complexity are proposed with the aim to investigate the effect of creep on corrosion-induced cracking. The simplest approach is based on an uncracked axis-symmetric thick-walled cylinder combined with a plastic limit on the radial pressure-induced by the accumulation of rust. The model with intermediate complexity comprises a thick-walled cylinder model divided into an inner cracked and an outer uncracked layer. The most comprehensive model consists of a thick-walled cylinder discretised by a three-dimensional lattice approach. Basic creep is predicted in all three approaches by means of the B3 model developed by Bažant and co-workers. Time dependence of strength of concrete is modelled using fib Model Code expressions. It is shown that for the comprehensive lattice model, creep has limited influence on critical corrosion penetration, which indicates that the dependence of the critical corrosion penetration on corrosion rate must have other sources.

Creep Effect on Time to Corrosion-Induced Cracking of Concrete Cover

Effect of creep on corrosion-induced cracking

Modeling of Time to Corrosion-Induced Cover Cracking in Reinforced Concrete Structures

Reinforcement Corrosion-Induced Cover Cracking and Its Time Prediction for Reinforced Concrete Structures

Corrosion-Induced Cracking Propagation Of Rc Beams Subjected To Different Corrosion Methods And Load Levels

Experimental Investigation of Corrosion-Induced Cover Cracking in Reinforced Concrete Structures

Developing a Three-Dimensional Finite Element Analysis Approach to Simulate Corrosion-Induced Concrete Cracking in Reinforced Concrete Beams

Prediction of Corrosion-Induced Concrete Cracking under External Loading and Stirrup Constraint

State-of-art of corrosion-induced cracking of reinforced concrete structures

Modeling the Amount of Steel Corrosion at the Cracking of Concrete Cover

Cover Cracking Model in Reinforced Concrete Structures Subject to Rebar Corrosion

Calculation of Creep Deformation of Stiffness-Degraded RC Beams after Strengthening with Increased Cross-Section

Chemical-mechanical transformation of the expansion effect for nonuniform steel corrosion and its application in predicting the concrete cover cracking time

Analysis on the Cracking of Concrete Cover Due to Rebar Corrosion

On the Penetration of Corrosion Products from Reinforcing Steel into Concrete Due to Chloride-Induced Corrosion

Prediction of Corrosion-Induced Crack Width of Corroded Reinforced Concrete Structures

Corrosion-crack path based probabilistic model to predict the durability behavior of RC components

Analysis on steel corrosion at the cracking of concrete

Creep crack growth prediction using a damage based approach

Analytical Solutions for Corrosion-Induced Cohesive Concrete Cracking

Prediction on Crack Propagation of Concrete due to Time-Dependent Creep under High Sustained Loading