Abstract:In this study, we developed a dynamic self-balanced electrochemical model to explore the intricate interplay between coupled heat-moisture transmission and the corrosion process of steel reinforcement in concrete structures. The model accounts for the diffusion, convection, and adsorption mechanisms of chloride ions in both the cement paste and interfacial transition zone (ITZ) phases. Additionally, it incorporates the balance between gaseous and dissolved oxygen, along with oxygen consumption during cathodic reactions. This framework allows for the dynamic self-balancing of macrocell and microcell, thus offering a comprehensive understanding of the non-uniform corrosion process under various environmental factors including temperature, humidity, chloride ions, and oxygen. To validate the model, we employed comprehensive monitoring approaches, coupled with artificial climate-accelerated corrosion experiments. These were designed to record variables such as temperature, humidity, oxygen concentration, and corrosion current density under time-varying environmental conditions. Our results indicate that while temperature within the concrete remains relatively uniform, humidity exhibits a non-uniform distribution. This non-uniformity in humidity is particularly noticeable at concrete cover surface, leading to convection and accumulation effects of chloride ions. Moreover, we observe a strong correlation between oxygen concentration and relative humidity. Corrosion current density for steel rebar is found to be higher at edge regions compared to central regions, owing to varying distances from the external soaking solution. The insights gained from this research offer valuable theoretical guidance for the design, construction, and maintenance of reinforced concrete structures, particularly those exposed to marine environments.

Chemical-mechanical transformation of the expansion effect for nonuniform steel corrosion and its application in predicting the concrete cover cracking time

Reinforcement Corrosion-Induced Cover Cracking and Its Time Prediction for Reinforced Concrete Structures

State-of-art of corrosion-induced cracking of reinforced concrete structures

Modeling of Time to Corrosion-Induced Cover Cracking in Reinforced Concrete Structures

Prediction of Corrosion-Induced Concrete Cracking under External Loading and Stirrup Constraint

Experimental Study and Analytical Model of Concrete Cover Spalling Induced by Steel Corrosion

Analytical model for critical corrosion level of reinforcements to cause the cracking of concrete cover

Experimental Investigation of Corrosion-Induced Cover Cracking in Reinforced Concrete Structures

Modeling the Amount of Steel Corrosion at the Cracking of Concrete Cover

Cover Cracking Model in Reinforced Concrete Structures Subject to Rebar Corrosion

Analysis on steel corrosion at the cracking of concrete

Behavior Of Rust Expansion Cracking Of Concrete Deduced By Equivalent Corrosion Products Of Steel Bar

Modelling the corrosion mechanism of steel bars in chloride-contaminated concrete with transverse cracks

Prediction of Corrosion-Induced Crack Width of Corroded Reinforced Concrete Structures

Numerical-based method for calculating reinforcement corrosion at concrete cover cracking due to corrosion

Analysis on the Cracking of Concrete Cover Due to Rebar Corrosion

Crack shape and rust distribution in corrosion-induced cracking concrete coupled with load

Damage Analysis and Cracking Model of Reinforced Concrete Structures with Rebar Corrosion

Composition and expansion coefficient of rust based on X-ray diffraction and thermal analysis

Corrosion Ratio of Reinforcement Bar in Reinforced Concrete Construction at the Moment of Cracking Due to Corrosion Expansion

Dynamic Self-Balanced Electrochemical Model for Non-Uniform Corrosion of Steel Reinforcement in Concrete under Combined Effects of Heat-Moisture-chlorine-oxygen