Abstract:The performance of corrosion-induced cracking of reinforced concrete members under transverse constraints was studied. Based on the theory of elastic-plastic mechanics and the hypothesis of uniform corrosion of a steel bar, a three-layer hollow cylinder model was established to predict the critical corrosion of the steel bar at the time of the cracking of the concrete cover. Taking the constraint of stirrups on surrounding concrete into consideration, it can be used to predict the corrosion rate of members with stirrups at the time of the cracking of the concrete cover, which further expands the application range of the corrosion-induced cracking models of concrete. On this basis, the critical corrosion rate of concrete under different stirrup ratios at the time of cracking was measured. The calculated results of the model are in accordance with experimental data. For corner steel bars, when the stirrup spacing is less than 100 mm, the existence of stirrups can effectively delay the occurrence of rust expansion cracks and enhance the durability of the structure. On the basis of this study, the problem of corrosion expansion and cracking of the concrete cover caused by non-uniform corrosion of steel bars along longitudinal and radial directions needs to be further studied in the future.

Behavior Of Rust Expansion Cracking Of Concrete Deduced By Equivalent Corrosion Products Of Steel Bar

Composition and expansion coefficient of rust based on X-ray diffraction and thermal analysis

Probability-Based Performance Degradation Model and Constitutive Model for the Buckling Behavior of Corroded Steel Bars

State-of-art of corrosion-induced cracking of reinforced concrete structures

Cover Cracking Model in Reinforced Concrete Structures Subject to Rebar Corrosion

Analysis on the Cracking of Concrete Cover Due to Rebar Corrosion

Non-uniform model of relationship between surface strain and rust expansion force of reinforced concrete

Modeling of Time to Corrosion Cracking in Reinforced Concrete Structures

Study On Modulus Of Rust Applied In Steel Corrosion Induced Concrete Cracking Model

Crack shape and rust distribution in corrosion-induced cracking concrete coupled with load

Damage Analysis and Cracking Model of Reinforced Concrete Structures with Rebar Corrosion

Rust Distribution And Corrosion-Induced Cracking Patterns Of Corner Located Rebar In Concrete Cover

Corrosion Ratio of Reinforcement Bar in Reinforced Concrete Construction at the Moment of Cracking Due to Corrosion Expansion

Modelling the corrosion mechanism of steel bars in chloride-contaminated concrete with transverse cracks

Corrosion-Induced Cracking Propagation Of Rc Beams Subjected To Different Corrosion Methods And Load Levels

Modeling the Amount of Steel Corrosion at the Cracking of Concrete Cover

Corrosion-Induced Cracking Model of Concrete Considering a Transverse Constraint

Experimental Investigation of Corrosion-Induced Cover Cracking in Reinforced Concrete Structures

Chemical-mechanical transformation of the expansion effect for nonuniform steel corrosion and its application in predicting the concrete cover cracking time

Relationship model between surface strain of concrete and expansion force of reinforcement rust

Modeling of Time to Corrosion-Induced Cover Cracking in Reinforced Concrete Structures