Abstract:An experimental investigation to detect embedded delamination and other forms of damage in heterogeneous structures using smart materials and a laser vibrometer is presented. Typically, piezoelectric actuators and sensors have been used for characterizing the presence of damage in composite structures. However, the interpretation of vibration responses in identifying damage using such a procedure is strongly dependent upon the numbers and types of sensors and actuators used. The use of Vibration Deflection Shapes (VDSs), which are the actual vibration patterns of a structure undergoing steady-state vibration, is an alternative approach that is investigated in this paper. Experiments are conducted on composite structures with piezoelectric actuator patches and embedded delaminations, using the VDS method and a Scanning Laser Doppler Vibrometer. The laser vibrometer provides a dense pattern of measurements of the structural response, which effectively increases sensor density compared to the widely spaced piezoceramic sensors used in other techniques. A series of experiments is performed on composite plate-beams with various sizes, ply-level locations, and placement of delaminations to comprehensively evaluate the performance of the laser technique. The VDSs are shown to be sensitive to structural parameter variations, and hence can be used to detect and locate damage in large composite structures, including a woven fiberglass curved plate and a honeycomb intertank panel. The successful experimental demonstration of the procedure using different test articles shows that the VDS method can become an effective and time saving tool for structural health monitoring, particularly for detection of damage in composites.

Assessing the effects of delamination on the damped dynamic response of composite beams with piezoelectric actuators and sensors

Delamination assessment of a laminated composite beam using distributed piezoelectric sensor/actuator

Identifying Delamination in Carbon Fiber Composites Based on Defect Modes in Imperfect Phononic Crystals

Surface strain distribution method for delamination detection using piezoelectric actuators and sensors

Experimental Investigation of Damage Detection in Composite Material Structures Using a Laser Vibrometer and Piezoelectric Actuators

Delamination Analysis of Carbon Fiber/Epoxy Composite Laminates under Different Loading Rates Using Acoustic Emission

Delamination prediction in composite beams with built-in piezoelectric devices using modal analysis and neural network

Damage Evaluation in Shear-Critical Reinforced Concrete Beam using Piezoelectric Transducers as Smart Aggregates

Monitoring interfacial defects in a composite beam using impedance signatures

Delamination detection in laminated composite beams using electro-mechanical impedance signatures

Damage assessment of smart polymer-matrix sandwich composite using multi-physics responses of in-situ piezoelectric transducers

Exploration of damage detection of imperfect composite beams using high-frequency piezoelectric signatures

Electromechanical Impedance Response of a Cracked Functionally Graded Beam with Imperfectly Bonded Piezoelectric Wafers

Vibration-Based In-Situ Detection and Quantification of Delamination in Composite Plates

Using d15 Piezoelectric Transducers for Ultrasonic Inspection of Delamination in Laminated Structures

Feasibility study of wave analysis for delamination detection of thick laminated composite beams

Influence of a delamination on Lamb wave excitation by a nearby piezoelectric transducer

Damage-monitoring in Composite Laminates by Piezoelectric Films

Optimization of piezoelectric sensor location for delamination detection in composite laminates

Dynamics-based Damage Detection of Composite Laminated Beams Using Contact and Noncontact Measurement Systems

Study on Delamination Damage of CFRP Laminates Based on Acoustic Emission and Micro Visualization