Abstract:Structural Health Monitoring, Ahead of Print. This work assesses experimentally three selected methods for estimating the time of arrival (TOA) of guided waves generated by impacts on a carbon fiber reinforced polymer plate-like structure. This is reached by the individual evaluation of the continuous wavelet transform (CWT), the modified energy ratio (MER), and the Akaike information criterion (AIC). Considering the anisotropic nature of the laminated structure, the propagation of guided waves within such thin-walled structure presents intricate challenges. The utilization of surface-bonded piezoceramic patch sensors aids to detect and measure wave propagation across the plate. The experiments involved impacting the plate at various positions using an impulse hammer and an impact gun, generating a comprehensive dataset encompassing signals captured by sensors placed at different locations. Our investigations have revealed that, with specific modifications, these methods offer effective means of estimating the TOA. In the CWT framework, the introduced frequency domain threshold crossing technique enhances precision in the TOA estimation. To address the slight delays in TOA estimations using the MER method, we refined the method by identifying the first local maximum that exceeds a predefined threshold. This enhancement significantly improves the method's ability to estimate the TOA of sensor signals. Among the explored methods, the AIC stands out for its precise detection of initial impact-induced signal alterations. This method consists of two sequential steps, with the second step notably influencing its outcome. By incorporating local minima from the method-specific function, instead of relying solely on the global minimum, a significant improvement in estimation accuracy was observed in several cases. Nevertheless, our modification led to notably inaccurate estimates in certain cases, indicating instances where the estimates were significantly too early. These findings offer valuable insights into successful TOA estimation, facilitating potential applications such as impact localization and guiding further research in this domain.

IMPACT DAMAGE DETECTION IN COMPOSITE LAMINATE PLATES USING AN INTEGRATED PIEZOELECTRIC SENSOR AND ACTUATOR COUPLE COMBINED WITH WAVELET-BASED FEATURES EXTRACTION APPROACH

Impact Damage Detection in Composite Laminates Using PVDF and PZT Sensor Signals

Experimental Investigation of Damage Detection in Composite Material Structures Using a Laser Vibrometer and Piezoelectric Actuators

Damage assessment of smart polymer-matrix sandwich composite using multi-physics responses of in-situ piezoelectric transducers

Damage Identification in Various Types of Composite Plates Using Guided Waves Excited by a Piezoelectric Transducer and Measured by a Laser Vibrometer

Rapid Multi-Damage Identification for Health Monitoring of Laminated Composites Using Piezoelectric Wafer Sensor Arrays

Detection and time-of-arrival estimation of impact-induced waves in composite laminates

Development of Laboratory-scale Lamb Wave-based Health Monitoring System for Laminated Composites

An Integrated Acousto/Ultrasonic Structural Health Monitoring System for Composite Pressure Vessels

Curvature Shape Based Impact Damage Detection in Composite Laminates

Structural Damage Identification Based on Integrated Utilization of Inverse Finite Element Method and Pseudo-Excitation Approach

Vibration-Based In-Situ Detection and Quantification of Delamination in Composite Plates

Impact Damage Detection in Patch-Repaired CFRP Laminates Using Nonlinear Lamb Waves

Direct-write piezoelectric coating transducers in combination with discrete ceramic transducer and laser pulse excitation for ultrasonic impact damage detection on composite plates

Detection of damage in laminated composite structures using transverse shear mode

Delamination Detection in Composite Plates Using Linear and Nonlinear Ultrasonic Guided Waves

Optimization of piezoelectric sensor location for delamination detection in composite laminates

Damage Imaging Post Processing for Delamination Size Assessment of CFRP Aeronautic Structures

Locating and Imaging Impact Damage with an Integrated System of PZT and Eddy Current Probe

Damage Localization in Composite Laminates by Building in PZT Wafer Transducers: A Comparative Study with Surface‐Bonded PZT Strategy

Monitoring damage in composite plates from crack initiation to macro-crack propagation combining linear and nonlinear ultrasonic techniques