Abstract:An experimental investigation to detect embedded delamination and other forms of damage in heterogeneous structures using smart materials and a laser vibrometer is presented. Typically, piezoelectric actuators and sensors have been used for characterizing the presence of damage in composite structures. However, the interpretation of vibration responses in identifying damage using such a procedure is strongly dependent upon the numbers and types of sensors and actuators used. The use of Vibration Deflection Shapes (VDSs), which are the actual vibration patterns of a structure undergoing steady-state vibration, is an alternative approach that is investigated in this paper. Experiments are conducted on composite structures with piezoelectric actuator patches and embedded delaminations, using the VDS method and a Scanning Laser Doppler Vibrometer. The laser vibrometer provides a dense pattern of measurements of the structural response, which effectively increases sensor density compared to the widely spaced piezoceramic sensors used in other techniques. A series of experiments is performed on composite plate-beams with various sizes, ply-level locations, and placement of delaminations to comprehensively evaluate the performance of the laser technique. The VDSs are shown to be sensitive to structural parameter variations, and hence can be used to detect and locate damage in large composite structures, including a woven fiberglass curved plate and a honeycomb intertank panel. The successful experimental demonstration of the procedure using different test articles shows that the VDS method can become an effective and time saving tool for structural health monitoring, particularly for detection of damage in composites.

Exploration of damage detection of imperfect composite beams using high-frequency piezoelectric signatures

Monitoring interfacial defects in a composite beam using impedance signatures

Delamination detection in laminated composite beams using electro-mechanical impedance signatures

Delamination assessment of a laminated composite beam using distributed piezoelectric sensor/actuator

An electromechanical impedance approach for quantitative damage detection in Timoshenko beams with piezoelectric patches

A Coupled Approach for Damage Detection of Framed Structures Using Piezoelectric Signature

An electro-mechanical impedance model of a cracked composite beam with adhesively bonded piezoelectric patches

Application of Emi Technique for Crack Detection in Continuous Beams Adhesively Bonded with Multiple Piezoelectric Patches

Quantitative Structural Damage Detection Using High-Frequency Piezoelectric Signatures Via The Reverberation Matrix Method

High-frequency Emi Signatures for Damaged Plates Using Finite Element Method

Surface strain distribution method for delamination detection using piezoelectric actuators and sensors

Electromechanical Impedance Response of a Cracked Functionally Graded Beam with Imperfectly Bonded Piezoelectric Wafers

Model experiments of damaged structural identification based on electro-mechanical impedance technique

A New Quantitative Acoustic Emission Model for Damage Characterization of Composite Laminates Using Original Waveforms

Detection of damage in laminated composite structures using transverse shear mode

Damage detection with high-frequency electric impedance signals

Integrated Structural Health Assessment Using Piezoelectric Active Sensors

A Quantitative Damage Identification Method for Cf/Ep Composite Laminates Based on Lamb Waves

Damage Localization in Composite Laminates by Building in PZT Wafer Transducers: A Comparative Study with Surface‐Bonded PZT Strategy

Assessing the effects of delamination on the damped dynamic response of composite beams with piezoelectric actuators and sensors

Experimental Investigation of Damage Detection in Composite Material Structures Using a Laser Vibrometer and Piezoelectric Actuators