Abstract:The main objectives of this study are to investigate the effects of three types of predamage and postdamage on the cracking behaviors of carbon fiber-reinforced polymer (CFRP)-strengthened reinforced concrete RC beams and to develop a rational methodology for predicting the average stabilized crack spacing. The predamage is induced by either sustained loading only or by the combination of sustained loading and corrosion. The predamage involved a sustained loading with an anchor tightening system, an electrochemical process to accelerate the migration of chlorides from an external electrolyte into the tested beams, and a wetting-drying cycle process with a controlled current to accelerate the corrosion of the reinforcing steel bars in the tested beams. The postdamage was induced by wetting-drying cycles. A loading test was conducted to determine the cracking behaviors of stabilized flexural cracks in the CFRP-strengthened beams with or without damage. The crack patterns, crack spacings, and test beam widths were recorded and compared, and the related mechanism was discussed. It was found that after CFRP strengthening, the effect of predamage or postdamage on the crack spacing and width is not as distinct as in the unstrengthened cases. The sustained loading predamaged beam showed insignificant differences in crack spacing and width compared to beams without predamage. Subsequently, a model capable of evaluating the crack behaviors of CFRP-strengthened beams with or without damage was developed. The analytical approach is based on equilibrium and compatibility equations to elucidate the average stresses of concrete and the CFRP laminate of a CFRP-strengthened beam element. (C) 2014 American Society of Civil Engineers.

An electro-mechanical impedance model of a cracked composite beam with adhesively bonded piezoelectric patches

Electromechanical Impedance Response of a Cracked Functionally Graded Beam with Imperfectly Bonded Piezoelectric Wafers

Application of Emi Technique for Crack Detection in Continuous Beams Adhesively Bonded with Multiple Piezoelectric Patches

Applying Bandgap Defect Modes to Crack Detection in Beams Using Periodic Concentrated Masses

An electromechanical impedance approach for quantitative damage detection in Timoshenko beams with piezoelectric patches

Delamination assessment of a laminated composite beam using distributed piezoelectric sensor/actuator

Exploration of damage detection of imperfect composite beams using high-frequency piezoelectric signatures

Electromechanical Impedance Analysis on Piezoelectric Smart Beam with a Crack Based on Spectral Element Method

Delamination detection in laminated composite beams using electro-mechanical impedance signatures

Monitoring interfacial defects in a composite beam using impedance signatures

Recursive formulations for dynamic analysis of a smart cracked beam based on the method of reverberation-ray matrix

Interface crack between two interface deformable piezoelectric layers

Cracking Behavior of Cfrp Laminate-Strengthened Rc Beams with Premechanical and Postmechanical Environmental Damage

Nonlinear Fracture Analysis of Delamination Crack Jumps in Laminated Composites

On the Study of Interface Crack in Layered Piezoelectric Structures

The Effects of Matrix Cracks on the Nonlinear Bending and Thermal Postbuckling of Shear Deformable Laminated Beams Containing Carbon Nanotube Reinforced Composite Layers and Piezoelectric Fiber Reinforced Composite Layers

Analytical modeling of the interface crack between a piezoelectric actuator and an elastic substrate considering shear effects

A Coupled Approach for Damage Detection of Framed Structures Using Piezoelectric Signature

A modeling method for vibration analysis of cracked laminated composite beam of uniform rectangular cross-section with arbitrary boundary condition

Interfacial debonding behavior of composite beam/plates with PZT patch

Analysis of beam-type fracture specimens with crack-tip deformation