Abstract:Many researches have been reported on the condition monitoring of civil infrastructures by means of piezoelectric sensors. Most of them made use of the impedance change of the piezoelectric device in relation to the creation of internal damages to the structure. The impedance measurement is a well accepted method in the piezoelectric sensor area, and has been proved by many authors to be useful for civil structure diagnosis. However, the impedance measurement normally requires sophisticated equipment and analysis technology. For more general and wide application of the piezoelectric diagnosis tool, a new methodology is desired to overcome the limitations of the impedance measurement. This paper presents the feasibility of a piezoelectric oscillator sensor to detect the damages in civil infrastructures. The oscillator sensor is composed of an electronic feedback oscillator circuit and a piezoelectric thickness mode vibrator to be attached to the structure of interest. Damage to the structure causes a change in the impedance spectrum of the structure, which results in a corresponding change of the resonant frequency of the structure. The oscillator sensors can instantly detect the frequency change in a very simple manner. Feasibility of the piezoelectric oscillator sensor was verified in this work with a sample aluminum plate where artificial cracks of different depth were imposed in sequence. Validity of the measurement was confirmed through comparison of the experimental data with the results of finite element analyses of the plate with cracks. Performance of the oscillator sensor was also compared with that of its conventional counterpart, i.e. impedance measurement, to manifest the superiority of the oscillator sensor.

Damage detection with high-frequency electric impedance signals

Three-dimensional Finite Element Analysis Based Electromechanical Impedance Model and Its Application

Quantitative Structural Damage Detection Using High-Frequency Piezoelectric Signatures Via The Reverberation Matrix Method

A Coupled Approach for Damage Detection of Framed Structures Using Piezoelectric Signature

High-frequency Emi Signatures for Damaged Plates Using Finite Element Method

Damage Determination of Pipelines Based on Variation of Vibrating Frequencies

Integrated Structural Health Assessment Using Piezoelectric Active Sensors

An electromechanical impedance approach for quantitative damage detection in Timoshenko beams with piezoelectric patches

Model experiments of damaged structural identification based on electro-mechanical impedance technique

Damage detection for structural health monitoring using ultra-sensitive flexible piezoelectret sensors

Impedance-Based Damage Detection for Civil Infrastructures

Structural Health Monitoring Using Electro‐mechanical Impedance Sensors

Vibration-Based Damage Detection Of Cable-Stayed Bridges

Structural-Damage Detection by Distributed Piezoelectric Transducers and Tuned Electric Circuits

Structural Health Monitoring Using High-Frequency Electromechanical Impedance Signatures

Exploration of damage detection of imperfect composite beams using high-frequency piezoelectric signatures

Damage Detection of Civil Infrastructures with Piezoelectric Oscillator Sensors

Piezoelectric Impedance Sensor-Based Structural Health Monitoring for Critical Members of Civil Infrastructures

Concrete Damage Diagnosis Using Electromechanical Impedance Technique

Structural Damage Detection Using PZT Transmission Line Circuit Model

Damage Assessment Using The Energy Dissipation Ratio Of Acceleration Signals