Abstract:<p>Structural damage identification approaches relying on structural vibration shapes (VSs) have been widely developed. Among the approaches, the pseudo-force approach has attracted increasing attention during the recent decade owing to the fact that the damage-induced pseudo-force is concentrated within the damage region only and rapidly attenuates at undamaged locations. Transverse pseudo-forces (TPFs) relying on flexural VSs have been used for structural damage identification. However, the TPF approach is inapplicable to some structures governed mainly by tension and not bending, such as cables in a cable-stayed bridge, because bending effects on their flexural vibrations are much smaller compared to their tension effects. In contrast, longitudinal VSs can be useful for identifying such damages, although they are much more difficult to measure than flexural VSs. In this study, a new concept of axial pseudo-force (APF) is formulated using damage-induced perturbation in longitudinal vibration, which forms the basis of a novel damage identification approach for longitudinally vibrating structures. Unlike the TPF approach relying on transverse bending, the proposed APF approach relies on axial tension/compression. In particular, a damage index (DI) is established to indicate and locate structural damage. The multiscale analysis is integrated into the DI to enhance its robustness against environmental noise interference. A normalization strategy is further proposed to deal with unknown material and structural parameters in practical scenarios. The capability of the approach in identifying damage in longitudinally vibrating structures is analytically verified on bars with two-sided notches. The applicability of the approach is experimentally validated by identifying a two-sided notch in an aluminum bar whose longitudinal VSs were acquired through non-contact vibration measurement using a three-dimensional (3D) scanning laser vibrometer (SLV).</p>

Damage Determination of Pipelines Based on Variation of Vibrating Frequencies

The Application of a Damage Detection Method Using Artificial Neural Network and Train-Induced Vibrations on a Simplified Railway Bridge Model

Vibration-Based Damage Detection Of Cable-Stayed Bridges

Structural Damage Detection Using Changes in Natural Frequencies: Theory and Applications

Numerical Research on Damage Detection of Simple Supported Beam Based on the Natural Frequency Vector Method

Damage Location Method of Pipeline Structure by Ultrasonic Guided Wave Based on Probability Fusion

Submarine Pipeline Vibration Considering Fluid-Structure Interaction

Structural damage identification using static test data and changes in frequencies

Structural damage identification using system dynamic properties

Structural Damage Identification using Modal Data. I: Simulation Verification

Damage detection method for structures based on the relative variation of wavelet total energy

Detecting Loosening of Bolted Connections in a Pipeline Using Changes in Natural Frequencies

A Strain Modal Flexibility Method to Multiple Slight Damage Localization Combined with a Data Fusion Technique

A novel structural damage identification approach using damage-induced perturbation in longitudinal vibration

Identification of Damage on Sluice Hoist Beams Using Local Mode Evoked by Swept Frequency Excitation

Damage Assessment of Structures Using Modal Test Data

Damage detection in composite structures using vibration response under stochastic excitation

Dynamic characteristics and damage recognition of blast-induced ground vibration for natural gas transmission pipeline and its integrated systems

Multiple Cracks Detection in Pipeline Using Damage Index Matrix Based on Piezoceramic Transducer-Enabled Stress Wave Propagation

Silicone Rubber-Packaged FBG Sensing Information and SSI-COV-Recognized Modal Parameters Motivated Damage Identification in Pipe Structures

Development and implementation of medium-fidelity physics-based model for hybrid digital twin-based damage identification of piping structures