Abstract:In bridge structural health monitoring, typically the dynamic response of the system is used to assess the health condition of the bridge. However, the dynamic interaction between a bridge and a passing vehicle imposes non-stationarity on the system response, whereby the bridge modal parameters become time-dependent and detecting damage, for example, based on the bridge modal parameters, becomes challenging. Dynamic vehicle-bridge interaction (VBI) responses have mainly been investigated for damage detection through identifying signal singularities and abrupt changes. The singularities are usually associated with high-frequency components (relative to the bridge natural frequencies), and it is demanding to isolate the damage-induced singularities from those caused by either an operational condition, i.e., track irregularities, or noise. Unlike the high-frequency range, the influence of damage on the resonance frequency of the coupled system has not been fully explored. The present study proposes the shape of the bridge instantaneous frequency as a damage sensitive feature in which the influence of the vehicle dynamics can be excluded. This study demonstrates the feasibility of a damage detection approach based on the bridge instantaneous frequency by applying Wavelet Synchrosqueezed Transform (WSST). In this approach the bridge instantaneous frequency variation induced by damage is distinguished from the bridge instantaneous frequency variation induced by the vehicle. Several damage scenarios that are implemented numerically are analyzed to verify the method’s performance. The results demonstrate that a high resolution instantaneous frequency extracted from the VBI dynamic response outperforms the resonance frequency in determining the local disruption, leading to detecting the damage. A Damage Index (DI) is also proposed as an attempt to quantify the damage severity.

Damage detection method for structures based on the relative variation of wavelet total energy

Damage Detection of Hangers in Arch Bridges Based on Relative Variation of Wavelet Total Energy

A Novel Mode Sharp-Based Damage Detection Method of Large-Span Bridges

Vibration-Based Damage Detection Of Cable-Stayed Bridges

Damage Detection of Continuous Beam Bridge Based on Maximum Successful Approximation Approach of Wavelet Coefficients of Vehicle Response

On-Line Health Monitoring and Damage Detection of Structures Based on the Wavelet Transform

Damage Detection of Concrete Structure Based on Approximate Entropy

Damage Assessment Using The Energy Dissipation Ratio Of Acceleration Signals

Structural Damage Identification Based on Wavelet Energy Distribution Vectors

Railway bridge damage detection based on extraction of instantaneous frequency by Wavelet Synchrosqueezed Transform

Wavelet De-Noising with Improved Threshold Method for Bridge Health Monitoring

On the Tapping-Scan Method Designed for the Damage Detection of Bridge Structures

The application of wavelet analysis and in structural damage detection

Review of Vibration-Based Damage Detection and Condition Assessment of Bridge Structures Using Structural Health Monitoring

METHOD OF BRIDGE HEALTH MONITORING BASED ON WAVELET ANALYSIS

Structural health monitoring and assessment using wavelet packet energy spectrum

A Survey On Damage Detection Methods: Advantages And Shortages

The tap-scan method for damage detection of bridge structures

Vibration-based structural damage identification using wavelet transform

Damage Detection of Beams Based on Experimental Wavelet Analysis of Flexible Waves

Using Two Sensors for Damage Detection of Bridge Based on Transfer Entropy of Vehicle-bridge Information