Abstract:Background: Fe80B20 amorphous alloys exhibit excellent soft magnetic properties, high abrasive resistance and outstanding corrosion resistance. In this work, Fe80B20 amorphous micro-fibers with HC of 3.33 Oe were firstly fabricated and the effects of annealing temperature on the structure and magnetic properties of the fibers were investigated. Methods: In this study, Fe80B20 amorphous fibers were prepared by the single roller melt-spinning method. The structures of as-spun and annealed fibers were investigated by X-ray diffractometer (XRD) (PANalytical X,Pert Power) using Cu Kα radiation. The morphology of the fibers was observed by scanning electron microscopy (SEM) (HITACHI-S4800). Differential scanning calorimetry (DSC) measurements of the fibers were performed on Mettler Toledo TGA/DSC1 device under N2 protection. Vibrating sample magnetometer (VSM, Versalab) was used to examine the magnetic properties of the fibers. The resonance behavior of the fibers was characterized by an impedance analyzer (Agilent 4294A) with a home-made copper coil. Results: The X-ray diffusion (XRD) patterns show that the fibers remain amorphous structure until the annealing temperature reaches 500°C. The differential scanning calorimetry (DSC) results show that the crystallization temperature of the fibers is 449°C. The crystallization activation energy is calculated to be 221 kJ/mol using Kissinger formula. The scanning electron microscopy (SEM) images show that a few dendrites appear at the fiber surface after annealing. The result indicates that the coercivity HC (//) and HC (⊥) slightly increases with increasing annealing temperature until 400°C, and then dramatically increases with further increasing annealing temperature which is due to significant increase in magneto-crystalline anisotropy and magneto-elastic anisotropy. The Q value firstly increases slightly when the annealing temperature rises from room temperature (RT) to 300°C, then decreases until 400°C. Eventually, the value of Q increases to ~2000 at annealing temperature of 500°C. Conclusions: In this study, Fe80B20 amorphous fibers with the diameter of 60 μm were prepared by the single roller melt-spinning method and annealed at 200°C, 300°C, 400°C, and 500°C, respectively. XRD results indicate that the fiber structure remains amorphous when the annealing temperature is below 400°C. α-Fe phase and Fe3B phase appear when the annealing temperature rises to 500°C, which is above the crystallization temperature of 449°C. The recrystallization activation energy is calculated to be 221 kJ/mol. The coercivity increases with increasing annealing temperature, which attributes to the increase of total anisotropy. All the as-spun and annealed fibers exhibit good resonance behavior for magnetostrictive sensors.

Effects of Crystal Structure, Morphology and Ion Diffusion During Annealing on Magnetic Properties of Hexagonal Barium Ferrite Films

Effect of Annealing Temperature on Permeability and Giant Magneto-Impedance of Fe-based Amorphous Ribbon

Effects of Annealing Temperature on the Structures, Ferroelectric and Magnetic Properties of Aurivillius Bi5ti3feo15 Polycrystalline Films

Effect of annealing temperature on crystallographic texture, magnetic and microwave properties of barium ferrite thin films

Magnetic properties of hexagonal barium ferrite films on Pt/MgO(111) substrates annealed at different temperatures

Effect of Annealing Temperature on the Properties of BaFe12O19 Thin Films Deposited on GGG (111) Substrates by Pulsed Laser Deposition

Effect of annealing temperature on the properties of BaFe 12 O 19 thin films deposited on GGG (111) substrates by pulsed laser deposition

Effect of annealing temperature on the properties of BaFe12O19 thin films deposited on GGG (1 1 1) substrates by pulsed laser deposition

Effect of annealing temperature on structure and high-temperature soft magnetic properties of (Fe0.9Co0.1)72.7Al0.8Si13.5Cu1Nb3B8V1 nanocrystalline alloy

Aluminum Doping Hexagonal Barium Ferrite Films with Large Perpendicular Magnetic Anisotropy and High Remanence Ratio

Thermal Annealing Effect on Structural and Magnetic Properties of ZnFe2O4 Thin Films Deposited by Magnetron Sputtering

Annealing Effects on Magnetic Properties of Amorphous TbFeCo Films

Crystal structure and magnetic properties study on barium hexaferrite of different average crystallite size

The Effects of Magnetic Field Annealing on the Magnetic Properties and Microstructure of Fe 80 Si 9 B 11 Amorphous Alloys

Effect of Annealing Temperature on the Properties of MnZn Ferrite Thin Films

The effect of post-annealing on barium strontium titanate films deposited by radio frequency magnetron sputtering

Effect of Carbon and Post-Annealing Treatment on Magnetic Properties of High-Quality Iron Thin Films

The Effect of Thickness and Annealing Treatment on Microstructure and Magnetic Properties of Amorphous Fe-Si-B-P-C Thin Films

Change of Microstructure and Magnetic Properties of Sintered Nd–Fe–B Induced by Annealing

Effects of Microwave-Assisted Annealing on the Structure and Magnetic Properties of (nd0.75pr0.25)9fe72ti1zr3mn X Mo4−x B10.5C0.5 Amorphous Ribbons

Effects of annealing on the structure and magnetic properties of Fe80B20 magnetostrictive fibers