Abstract:This paper examined the mechanism of ultrasonic depressive effects on Al/Cu intermetallic compounds (IMCs) during friction stir welding (FSW) process by combining numerical simulations and macro/microstructural evolution analyses. The coupling process of ultrasonic field and the multienergy field for Al/Cu-FSW was simulated for the first time. The ultrasonic mechanisms of the acoustic thermal effect, acoustic anti-friction effect and acoustic softening were considered in the constitutive model and thermal-stress boundary conditions. Based on our research, ultrasonic vibration (UV) could homogenize the Al/Cu plastic difference and the Al/Cu rheological properties in the mixed zone. The modeling results showed that the difference in flow stress between Al and Cu was reduced on the two sides of the weld. The gradient of the phase-volume fraction in the weld cross section was reduced under UV, which reduced the power of Al/Cu interdiffusion and inhibited the generation of IMCs via diffusion. In addition, the acoustic softening and antifriction effects reduced the contact interfacial heat flux and the peak temperature. The heat generation within the nugget zone decreased by approximately 12.8%. The UV reduced the absolute value of the effective heat of formation (EHF) for Al 2 Cu and Al 4 Cu 9 , which indicated that ultrasound could inhibit the generation of IMCs to some extent. The decrease of heat and concentration gradient weakened the atomic diffusion and growth rate of IMCs. Therefore, the SEM images of the Al/Cu interfaces showed that the total thickness of the Al/Cu-IMCs decreased by approximately 30.5%, the distribution of IMCs was more uniform, and the boundaries were straighter under ultrasonic effects. Under ultrasonic action, more fine Cu particles entered the Al side, and the Cu particles were scattered, showing a dispersed distribution. Furthermore, acoustic softening enhanced the plastic flow and increased the number of layered staggered structures at the Al/Cu interface, which enhanced the mechanical interlocking of the Al/Cu composite. The tensile strength improved 21.3 % under the ultrasonic treatment.

Ultrasonic vibration-induced severe plastic deformation of Cu foils: effects of elastic-plastic stress wave bounce, acoustic softening, and size effect

Effect of cryogenic impact deformation and subsequent annealing on microstructure and microhardness of pure copper

Study on Metal Forming Patterns of the Ultrasonic Vibration Assisted Upset-extruding Process

Molecular dynamics study of acoustic softening effect in ultrasonic vibration assisted tension of monocrystalline/polycrystalline coppers

Effect of Superimposed Ultrasound on Mechanical Properties of Copper

Acoustic Softening and Residual Hardening in Aluminum: Modeling and Experiments

Investigation on Deformation Behavior in the Surface of Metal Foil with Ultrasonic Vibration-Assisted Micro-Forging

Influence of Superimposed Ultrasound on Deformability of Cu

Molecular dynamics study on surface effect in ultrasonic vibration assisted upsetting of monocrystalline copper

Mechanical Properties and Microstructure of Rolled and Electrodeposited Thin Copper Foil

An investigation of the combined size and rate effects on the mechanical responses of FCC metals

An Evaluation of the Impact Effect on the Surface Microstructure and Its Induced Temperature Changes during Ultrasonic-Assisted Micro-Forging

Size Effects on the Wave Propagation and Deformation Pattern in Copper Nanobars under Symmetric Longitudinal Impact Loading

Correlation between microstructural deformation mechanisms and acoustic parameters on a cold-rolled Cu30Zn brass

Mechanism of ultrasonic effects on thermal-stress field in Cu/Al-FSW process

The Effect of Superimposed Ultrasonic Vibration on Tensile Behavior of 6061-T6 Aluminum Alloy

Strain localization and ductile fracture mechanism of micro/mesoscale deformation in ultrafine-grained pure copper

Deformation Behavior and Microstructural Evolution of T-Shape Upsetting Test in Ultrafine-Grained Pure Copper

An energy based modeling for the acoustic softening effect on the Hall-Petch behavior of pure titanium in ultrasonic vibration assisted micro-tension

Molecular Insight into the Deformation of Single Crystal Copper Loaded by High-Speed Shock Wave

Revealing the mechanical responses and accommodation mechanisms of Cu-based amorphous composites under elastic preload and ultrasonic vibration treatment