Abstract:The capacitor mismatch among diverse defects caused by variations in the manufacturing process significantly affects the linearity of the capacitor array used to implement the capacitive digital-to-analog converter (CDAC) in the successive-approximation register (SAR) analog-to-digital converter (ADC). Accordingly, the linearity of the SAR ADC is limited by that of capacitor array, resulting in serious yield loss. This paper proposes an efficient foreground self-calibration technique to enhance the linearity of the SAR ADCs by mitigating the capacitor mismatch based on the split ADC architecture along with variable capacitors. In this work, two ADC channels (i.e., ADC1 and ADC2) for the split ADC architecture include their capacitive DACs (CDACs) whose binary-weighted capacitor arrays consist of variable capacitors. A charge-sharing SAR ADC is used for each ADC channel. In the normal operation mode, their digital outputs are averaged to be the final ADC output, as in a conventional split ADC. In the calibration mode, every single binary-weighted capacitor for the two ADCs is sequentially calibrated by making parallel or/and antiparallel connection among two or thee capacitors from the two channels. For instance, because the capacitors of the CDACs ideally exhibit the binary-weighted relation as Cn=2×Cn−1, the variable capacitor Cn of ADC1 can be updated to be closest to the sum of Cn−1 of ADC1 and Cn−1 of ADC2 for the calibration. For the process, the two capacitor arrays of the two ADCs can be reconfigured to be connected to each other, so that the Cn of ADC1 can be connected with two of the Cn−1 of ADC1 and ADC2 in antiparallel. The two voltages at the top and the bottom plates of the CDAC are compared by a comparator of ADC1, and the comparison results are used to update Cn. This process is iterated, until Cn is in agreement with the sum of two of Cn−1. Finally, all the capacitors can be calibrated in this way to have the binary-weighted relation. The simulation results based on the proposed work with a split SAR ADC model verified that the proposed technique can be practically used, by showing that the total harmonic distortion and the signal-to-noise-and-distortion ratio were enhanced by 21.8 dB and 6.4 dB, respectively.

Analog-to-digital converter with non-linear capacitor compensation

Modeling of a 14-bit, 100-MS/s pipelined ADC with digital nonlinearity calibration

A 14-Bit Column-Parallel Two-Step SA ADC with On-Chip Scaled Reference Voltages Self-Calibration for CMOS Image Sensor

A Calibration Scheme for a 800-Ms/s 14 Bit Pipelined ADC in 28-Nm CMOS

A 1.5 Bit/s Pipelined Analog-to-Digital Converter Design with Independency of Capacitor Mismatch

A New Capacitance-to-Frequency Converter for On-Chip Capacitance Measurement and Calibration in CMOS Technology

A Tunable Foreground Self-Calibration Scheme for Split Successive-Approximation Register Analog-to-Digital Converter

A 12-Bit 3.7-Msample/s Pipelined A/D Converter Based on the Novel Capacitor Mismatch Calibration Technique

A High Linearity,13bit Pipelined CMOS ADC

Charge-Compensation-Based Reference Technique For Switched-Capacitor Adcs

A Capacitor Paring Technique for Capacitor Mismatch Reduction

A High-Linearity Capacitance-to-Digital Converter Suppressing Charge Errors From Bottom-Plate Switches

Analysis of Coupled High-resolution Charge Scaling DAC

Calibration Method for Improving the Linearity of Analog-to-digital Converters in CMOS Image Sensor

A 16 Bit 125 MS/s Pipelined Analog-to-Digital Converter with a Digital Foreground Calibration Based on Capacitor Reuse

A 12-Bit, 100 MS/s SAR ADC Based on a Bridge Capacitor Array with Redundancy and Non-Linearity Calibration in 28 Nm CMOS

Improving Source-Follower Buffer For High-Speed Adc Testing

A Digital Calibration Technique with High Speed and Low Complexity

Current-to-voltage conversion circuit for D/A converter

Capacitor Recombination Algorithm Combined with LMS Algorithm in 16-Bit SAR ADC with Redundancy

Digital Background Calibration in Pipelined ADCs Using Commutated Feedback Capacitor Switching