Abstract:In this paper, a new large dither injection technique is proposed for improving linearity in pipelined analog-to-digital converters (ADCs), without losing the dynamic range of the ADCs and deteriorating the corresponding amplifier’s linearity. First, analyses of a proper pipelined ADC’s architecture are performed for large dither injection. Then, a 9-bit capacitive digital-to-analog converter (DAC) with split architecture is developed to inject the dither ranging from −511/1024 least significant bit (LSB) to 511/1024 LSB of the first stage. To counteract the consumption of the correction range by the capacitive injection dither, the novel 6-bit complementary DACs embedded in the comparator threshold generation circuit are proposed to realize comparator dither injection. In addition, the dither injection amplitude is configurable for investigating different amplitude’s effects on the linearity of the ADC. Finally, the proposed dither injection circuit, together with a 16-bit 150 million samples per second (MSPS) ADC, is implemented in a 0.18- $\mu \text{m}$ CMOS technology. The measured results demonstrate the effectiveness of the proposed techniques. The optimum dither is the 9-bit dither, improving not only the spurious free dynamic range (SFDR) of the small signal by at least 13 dB but also that of the large signal by more than 8 dB compared to the case without dither injection. Moreover, dither injection makes the noise floor clean.

A 1.5 Bit/s Pipelined Analog-to-Digital Converter Design with Independency of Capacitor Mismatch

Low power design for 14-bit 100MSPS pipelined ADC

Modeling of a 14-bit, 100-MS/s pipelined ADC with digital nonlinearity calibration

A Calibration Technique Based on Frequency-Domain Characteristics for Pipelined ADCs

A Low Power Sample-and-Hold Circuit for Pipelined A/D Converter

A Calibration Scheme for a 800-Ms/s 14 Bit Pipelined ADC in 28-Nm CMOS

A Maximum-Likelihood-Estimation-Based Digital Background Calibration Technique for Interstage Gain Error in Pipelined ADCs

A 12-Bit 3.7-Msample/s Pipelined A/D Converter Based on the Novel Capacitor Mismatch Calibration Technique

A Pipelined A/D Conversion Technique With Low Inl And Dnl

A 14bit 500MS/s 85.62dBc SFDR 66.29dB SNDR SHA-less pipelined ADC with a stable and high-linearity input buffer and aperture-error calibration in 40nm CMOS

A 10-bit 30-MS/s 50mW pipelined A/D converter

A 16 Bit 125 MS/s Pipelined Analog-to-Digital Converter with a Digital Foreground Calibration Based on Capacitor Reuse

An Efficient Calibration Technique for Pipeline ADC.

Low Power Pipelined A/D Converter in 0.6 Μm Technology

A 10-bit 20-Msample/s 49mW CMOS pipelined A/D converter

A High Linearity,13bit Pipelined CMOS ADC

An Improved Capacitor Averaging Technique for Pipelined ADCs

A 150 MS/s 10-Bit CMOS Pipelined Subranging ADC with Time Constant Reduction Technique.

Digital Background Calibration in Pipelined ADCs Using Commutated Feedback Capacitor Switching

Analysis and Design of a Large Dither Injection Circuit for Improving Linearity in Pipelined ADCs

An Incomplete Settling Technique for Pipelined Analog-to-Digital Converters