Abstract:Selective hydrogenation of fatty esters into high-value-added fatty alcohols over non-noble-metal (e.g., Ni and Co) catalysts is highly desirable for the utilization of natural oils. Although these catalysts offer high hydrogenation activity and are reasonably economical, they suffer from low hydrodeoxygenation activity at low temperatures while promoting certain side reactions (e.g., C–C bond hydrogenolysis and decarbonylation/decarboxylation) at high temperatures, which are undesirable for the production of fatty alcohols. In this study, we tested and optimized the performance of Ni metal catalysts with various metal–oxide modifiers and supports for the selective hydrogenation of methyl palmitate to cetyl alcohol. The most efficient catalytic system (Ni-VOx/TiO2, Ni:V ≈ 1:1, mol/mol) achieved almost quantitative conversion with 90% selectivity for cetyl alcohol under mild conditions (220 °C and 4.0 MPa of H2), which was ascribed to the ternary synergistic action of Ni, oxygen vacancies, and Lewis acid sites. The catalytic synergy of the Ni metal and oxygen vacancies (formed by the reduction of TiO2) was primarily responsible for C–O bond cleavage in methyl palmitate to form palmitic aldehyde as the main intermediate. Furthermore, the V species engaged in metal–Lewis acid cooperation at the metal–oxide interface to efficiently promote the C═O bond hydrogenation of palmitic aldehyde and suppress the undesired C–C bond cleavage, thereby facilitating the highly selective production of cetyl alcohol. The obtained insights into the active phase of Ni-VOx/TiO2 catalysts are expected to facilitate the development of highly efficient catalysts for the selective hydrogenation of fatty esters and other biomass-derived compounds containing C═O/C–O groups.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acssuschemeng.1c02181?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acssuschemeng.1c02181</a>.FTIR testing procedure; GC testing procedure; (Figure S1) (A) recyclability of the Ni-VOx/TiO2 (1:1) catalyst and (B) ICP-MS of the used catalyst; (Figure S2) XRD patterns of calcined catalysts; (Figure S3) H2-TPR profile of calcined catalysts; (Table S1) compositions of the catalysts reduced in H2 at 500 °C determined by ICP; (Table S2) saturation magnetization (Ms), remanent magnetization (Mr), and coercivity (Hc) values for different catalysts (<a class="ext-link" href="/doi/suppl/10.1021/acssuschemeng.1c02181/suppl_file/sc1c02181_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Glucose-derived carbon-coated Ni–In intermetallic compounds for in situ aqueous phase selective hydrogenation of methyl palmitate to hexadecanol

Metal–organic Framework-Derived Carbon Coated Ni–In Intermetallic Compounds for In-Situ Selective Hydrogenation of Methyl Palmitate to Hexadecanol in Aqueous Phase Using Methanol As Hydrogen Donor

In Situ Hydrogenation of Methyl Palmitate to Hexadecanol on TiO2- and ZrO2-Supported Ni-In Catalysts in the Aqueous Phase Using Methanol As a Hydrogen Donor

Carbon-coated Ni-Co alloy catalysts: preparation and performance for in-situ aqueous phase hydrodeoxygenation of methyl palmitate to hydrocarbons using methanol as the hydrogen donor

Efficient and Stable Cu-Ni/ZrO2 Catalysts for in Situ Hydrogenation and Deoxygenation of Oleic Acid into Heptadecane Using Methanol As a Hydrogen Donor

Preparation of Ni/SiO<sub>2</sub> catalyst in ionic liquids for hydrogenation

Preparation of Ni/SiO 2 catalyst in ionic liquids for hydrogenation

Efficient hydrothermal deoxygenation of methyl palmitate to diesel-like hydrocarbons on carbon encapsulated Ni−Sn intermetallic compounds with methanol as hydrogen donor

In-situ aqueous phase hydrodeoxygenation of methyl palmitate on Ni-Co alloy embedded in mesoporous carbon hollow spheres catalysts

In Situ Aqueous Phase Hydrodeoxygenation of Methyl Palmitate on Ni-Co Alloy Particles Embedded in Mesoporous Carbon Hollow Sphere Catalysts

Highly Efficient SiC-Supported Ni-Based Catalysts with Enhanced Recycle Stability for One-Pot Cellobiose Hydrolytic Hydrogenation to Hexitols

In situ aqueous phase hydrodeoxygenation of methyl palmitate to hydrocarbons on Ni catalyst derived from the reduction of LaNiO3 perovskite

Polymethyl Methacrylate assisted mesoporous TiO2 supported Ni–Co alloy catalysts for the in situ hydrodeoxygenation of methyl palmitate

NiBi Intermetallic Compounds Catalyst Toward Selective Hydrogenation of Unsaturated Aldehydes

Efficient Bimetallic NiCu-SiO2 Catalysts for Selective Hydrogenolysis of Xylitol to Ethylene Glycol and Propylene Glycol

Efficient Deoxygenation of Methyl Esters to Hydrocarbons on Al2O3 Supported Ni-Sn Intermetallic Compounds

Bimetallic Ni and Mo Nitride as an Efficient Catalyst for Hydrodeoxygenation of Palmitic Acid

Efficient and robust ultrathin porous carbon encapsulated Ni–Sn intermetallic compounds derived from metal–organic frameworks for in-situ aqueous phase deoxygenation of fatty acid methyl esters

Selective Hydrogenation of Methyl Palmitate to Cetyl Alcohol via Ternary Synergistic Catalysis of Ni, Oxygen Vacancies, and Lewis Acid Sites under Mild Reaction Conditions

The Hydrogenation/dehydrogenation Activity of Supported Ni Catalysts and Their Effect on Hexitols Selectivity in Hydrolytic Hydrogenation of Cellulose

Nickel molybdenum bimetallic nitrides as efficient catalysts for hydrodeoxygenation of methyl palmitate